Search:

There is a spacer for a O2 that goes between the upper and lower exhaust.19737

My dealer pugged that hole before took the boat home. He said it was a stupid idea that would lead to premature stringer rot. There's always a towel somewhere in the boat.

I think the stock prop was a standard 13/13. I'm sure the 351 runs happier. But the mods you've dun really haven't increased the HP much. You should ask how am I going to use the boat. Speed isn't...

If your serious about skiing a PP is the best up grade you could do to a comp. You'll have a grate pull even when the wife is driving.

19504Stock mirror

I looked at comp pictures. You have did a assume job on that comp but I'm partial to your Rider. Hope you still have it and if not, it went to loving home. I have the letters and the wave made...

Good try. Thanks for looking . I'd like to find the exact material. I'm going to move forward with polishing after the holidays. I'll just mask off the rubber. I have enough factory striping left...

It's a closeup of the rubber mat. that's on the bow.

19435I've looked eBay, Amazon exct. Not sure what to call it. 17 years ago I had to buy a 3x5'

yes I'm not sure what it's called.

I tried doing what you are thinking and I get it. But mix and match is a pain in the you know what. Been there. I ended changing out the rudder and new matching rudder box. The new parts have a...

19418I hope you boys can help me find the rubber matting that goes in the bow. The comp is going in this winter for a polishing. The windshield is coming of new strips the works and I'd like to...

It would be a good time to up grade to the new style rudder & box assembly.

Come on boys shorten it up. My ski buddy's & I are at retirement age. The thrills start @ 34.2 mph And 32 to 35 off.

The manufactures name is on the side of the O2 spacer. I think he is out in the grate lakes area.

This is how i installed the O2 censer19339.

I used the fast EFI Retro kit. Runs the best ever. Going on the 4 years.19338

I've had my comp for over 35 years and tried many different ways over the years to quiet the rumble. The exhaust pipes are 3". So is a 2" glass pack. I got 2 -32" glass packs removed the guts. Took...

Do you know where to get the striping?

19134This is for pic. is bout 3 years ago. I'm about 200 lbs. 18 to 20 gal. of fuel.

I had trouble with the PCV valve bad idle. There only about 5 bucks.

Try a new PCV valve

I look at Spectrum first. No luck.

19133I'm needing to repair the keel my 86 TS6M. The old girl has been on too many beaches. Does anybody know if there's a place I can find the factory color code for the dark grey supra used?

I repainted my trailer a couple of years ago. New lights, paint, carpet the works. Took about 3 days, start to finish by myself. I made a list of all the materials needed and had it ready to go. I...