Try one of these http://bpi.ebasicpower.com/pc/CRURA057028/PLE3C
Type: Posts; User: UKandH
Try one of these http://bpi.ebasicpower.com/pc/CRURA057028/PLE3C
As far as i know, there is no dedicated designed marine engine in an inboard ski / sports boat, All are based upon road car / truck engines, so your mechanic is a knob :)
RWP's can be bought from...
No problem for me, however i am in the UK.
I ended up using acrylic which is oven heated and then formed over a mould.
http://www.solentacrylic.co.uk/File/windows.php
If its the curved one your screwed beyond belief.
I had to commission a pair to be made at a HUGE cost of $1000 for the pair.
If its the flat screen version, its a simple matter of getting a glass...
My TS6 1:1 drive requires Mineral only...NO SYNTHETIC, it is written everywhere in the manuals and on the tranny. I also talked with a local dealer and he said to avoid synthetic on my transmission...
You always get gremlins in a fresh rebuild mate, even so that is impressive considering the ground up rebuild.
Transmission....ouch :( was it a hose failure or something more sinister??
Man that is the sweetest Supra out there and a credit to your skills.
I have a problem with IO drives reliability, take the Mercruiser Alpha 2 and Bravo drives....WHAT A POS they are!!! I had to rebuild mine on my Glastron and my ChrisCraft (had a Bravo) Nothing but a...
I saw the announcement on Sunday from Mike (his son) on FaceBook. His family have asked for no posts on his FB page.
I have met Andy on many occasions and had the pleasure of towing him in...
OK as a *yachtie* this is a subject i know a fair bit about, so a lot depends on the bottom of the lake / sea / river etc.
Silt, rocks, Kelp, weed, mud, clay etc.
The general rule of thumb is 1 by...
for 200k you could get a nice early Carmargue 46 which sleeps 6, handles the open sea and has twin V8 diesels, i know what id rather have, keep the TS6 and buy the Carmargue haha. $200k for a boat...
suck it up cupcake :D
https://www.youtube.com/watch?v=JankgaPZp9w
Great result :)
Gauge fault on the volt meter for sure....check voltage across the terminals of the volt meter and compare.
Fuel gauges are notoriously inaccurate and fluctuate when moving along. What happens when...
Yep, thats a straight boom, as Cadunkle has stated though, the pole clamp is missing.
The RPM intake is for higher RPM ranges up to about 6500 revs, our engines max out at 4.5 to 5K so the RPM manifold is not the right selection unless your building a drag boat :D
I would go for the...
If it starts eventually its unlikely to be the battery. As CR has said, possibly Solenoid or starter
Also check engine earth connection.
The start switch is from a Honda S2000 sports car with a relay to carry the current. All the switch does is supply the ignition feed.
Correct, the TPS is just a feedback into the ECU to tell the system where the throttle position is. Its just a sanity check for the DFI.
TPS issues usually manifest themselves as erratic idle,...
Black trim on the seats...OUCH, burnt legs in hot sun haha....but it looks sweet :D
I found that the 4" round plastic sofit breathers from a local hardware store fitted...total cost $2 for the 4, all i had t do was trim the broken grill parts off of the original and dremmel out the...
Yep, carb rebuild.
It is worth checking ign timing etc first though.
No worries, pick away :D
I take it this is a PP system with a paddle wheel and not GPS?
Sounds as if there is an issue with the speed signal.
Main check is making sure the PP is set up correctly on system off...i.e....
If i was rebuilding to a budget then go to Falcon Performance (falconglobal on ebay) If im rebuilding with quality parts at reasonable price i.e. not Summit racing, then i use Falcon every time. $400...