Search:

Type: Posts; User: michael hunter

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    72

    I may have one off a 85 comp I will look.

    I may have one off a 85 comp I will look.
  2. Replies
    3
    Views
    135

    Give Delta prop a call they are very...

    Give Delta prop a call they are very knowledgeable about props . Use PND discount code
  3. Replies
    5
    Views
    137

    I had two Goodyear Marathon ST tires blow out at...

    I had two Goodyear Marathon ST tires blow out at highway speed I hope the Endurance hold up better.
  4. If its wood coat it with CPES.

    If its wood coat it with CPES.
  5. Looks like Marine grade plywood to me . If you...

    Looks like Marine grade plywood to me . If you use plywood go to www.rotdoctor.com and get their CPES coat the wood 3-4 coats after you drill the holes then glass it in. I have heard some use Coosa...
  6. Replies
    5
    Views
    137

    Most trailer ST tires are rated for 65 mph summer...

    Most trailer ST tires are rated for 65 mph summer heat and fast speed is a recipe for failure. I am thinking about buying LT tires next time . The RV guys are going that way because of the number of...
  7. Replies
    2
    Views
    126

    Are you on Lake Lanier?

    Are you on Lake Lanier?
  8. Replies
    7
    Views
    247

    I agree it sounds like a Choke issue. Where are...

    I agree it sounds like a Choke issue. Where are you located?
  9. Replies
    5
    Views
    191

    Use the search bar on the top right look for my...

    Use the search bar on the top right look for my thread[ MY QUICK FLUFF & BUFF HAS GONE AWRY] on page 6 it shows the new floor going in. The 4 round holes are for the 4 tubes coming from the front...
  10. Replies
    5
    Views
    191

    Davis Unified Ignition Marine Performance D.U.I...

    Davis Unified Ignition Marine Performance D.U.I distributor.
  11. Replies
    5
    Views
    191

    The front vents on my comps go through the floor...

    The front vents on my comps go through the floor in the front into the bilge area.
  12. Replies
    5
    Views
    191

    Are you talking about the front vents or rear?

    Are you talking about the front vents or rear?
  13. Replies
    5
    Views
    191

    I live on the south side of Lake Lanier near...

    I live on the south side of Lake Lanier near Holiday marina . I could walk you through the repairs. The first thing is the Carb its probably the cause of the spark plugs fowling out every year. I...
  14. Replies
    16
    Views
    437

    That adaptor plate is a spread bore, Holley's are...

    That adaptor plate is a spread bore, Holley's are square bore. I have never seen a spread bore Holley . I don't know how it will effect the running. Can you take a side pic of the carb and engine to...
  15. Replies
    16
    Views
    437

    Does your engine tilt back or is it level? Pics...

    Does your engine tilt back or is it level? Pics would help.
  16. Replies
    4
    Views
    206

    May be the sealant around the exhaust pipe where...

    May be the sealant around the exhaust pipe where it goes through the transom.
  17. I am not very familiar with the Vision it looks...

    I am not very familiar with the Vision it looks like a comp. 20' long and 2450 lbs it was designed to make a small wake . You can add ballast bags and a suck gate but I doubt you will get the wake...
  18. I sent you a PM

    I sent you a PM
  19. How old is the thread? How much do you want for...

    How old is the thread? How much do you want for it?
  20. Replies
    10
    Views
    721

    I bought one when I did the 84 comp . Someone...

    I bought one when I did the 84 comp . Someone posted they are no longer available ? I haven't needed once so I never verified.
  21. Replies
    7
    Views
    357

    Check the exhaust manifolds also.

    Check the exhaust manifolds also.
  22. If the knock sensor is not securely connected it...

    If the knock sensor is not securely connected it will throw a code and may affect driveability.
  23. Yes it looks like a plug for the engine block....

    Yes it looks like a plug for the engine block. Look on the sides below the exhaust manifolds or add water and look for the leak. The stud and nut is to hold the Knock sensor . Look on the engine...
  24. Replies
    10
    Views
    721

    Don't throw the pan away . They are not available...

    Don't throw the pan away . They are not available anymore.
  25. Replies
    5
    Views
    337

    The injectors get their signal from the ignition...

    The injectors get their signal from the ignition primary through the ECM . It sounds like the ECM may be the problem . You don't have the equipment to test it . You may want to talk to the dealer at...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4