I emailed him this for fun:
"That is a 351 Windsor.. Not a Chevy 454.
Stringers rotten in that thing?" lol
I think it would totally be your place to email him. You know he is going to take...
Type: Posts; User: 92SupraComp
I emailed him this for fun:
"That is a 351 Windsor.. Not a Chevy 454.
Stringers rotten in that thing?" lol
I think it would totally be your place to email him. You know he is going to take...
Ok, not CL. But the boat is Cool as hell!
http://boats-from-usa.com/omc/omc-dual-deluxe-68930
The 8.1 (496) Is an extremely heavy duty 454 based motor. 4 bolt mains (with an extra main added I believe) and 4 bolt end caps. The heads though use a 18 bolt pattern.
GM took the 454 and built...
ski dim used to have the switches. Correct Craft used them in everything too. If you pull one out there is a name on them.. Can't remember. Each one is a breaker. All sorts of different amp ratings.
That's exactly it. The boat mechanic had to take the old cracked windshield off, carefully box it, and ship it via crate. They had never done a 1992 - 1996 Supra Comp with the Large Curved glass. So...
Got it in last night. Wow.. Talk about tight fit. Makes me a bit nervous having it wedged against the cooling hose and thermostat housing.. Not much adjustment either. But boy the engine wants to...
http://www.oceandynamics.com/
We had one side for our 92 comp done by them. The glass 1 one piece passenger side glass was $4400 O.o We went with Lexan for that instead..
We had a horrible vibration after one good hole shot in our Comp. Got it in the lift and saw the end of the shaft was out of round. Took it apart and found it had cracked 90% of the way through! O.o ...
I am sad to pull it off. I think it is really cool. However, for the past 20 years it had acted up and my dad just quit bothering with trying use this boat for skiing... As of the last past 7 years...
I keep coming across prop threads... It's really that good huh?
I just came across a youtube vid of ski nautique that had a acme 422. That thing really shot out of the water.
Voltage gauge could be going bad or the connections to it are bad. Although usually if bad connections it will read low..
yeah.. Well the wood is very thin. About 1/4". For each support there at least an 1" on top of the 1/4" wood. Wood with poly ester resin soaked into it and then wrapped in glass is extremely...
So I tore into it some more...
In the pics, all of the wood underneath the left support, is just flat out rotten... So I have to cut all of that out and redo it. Good news is that as I go to...
Be careful if you touch those speedometers. They are precision instruments. If they both work, and work well, they can fetch a good price. One of our is broken and to have it repaired is very...
Hi guys. Boy it's been a while since I have been on here.
Our comp is still running, sorta... The ignition system , Pro Tec Engine Management, has really had it. Finally ordered a D.U.I....
Really single axle trailers are great if you are near the water. They turn easy, and back up much easier. Plus thats 2 less wheels and bearing to take care of...
But for highway travel, a tandem...
Wait a minute... Are talking an old school plunger type starter or a newer mini high torque starter?
Heat, a bfh, and some more heat... But really, you need heat and a puller.
Umm, if the key is triggering the solenoid, then the key is good. Check for voltage on the switched side of the solenoid. It sounds like you have a bad starter.
We bought a Lowrance for $150 on ebay. Mounted the transducer inside the hull. Shows temp and depth. Inside the hull works only at low speeds and stopped. You have to mount it on the transom if you...
there is a sight highly regarded by the CCfan group and they have been selling GPS conversion kits for years now. The CC guys love it. Also, if you send your gauge in they will repair it aswell. They...
sorry. Yes it is the #620. Dont know why i put in the 8
Adjust the legs. They have a large amount of adjustment...
Also, keep it level! If its not level the weight is not dispersed evenly and is bad for the lift.
Buy the Globe Stop #628 silicone impeller. Will far outlast those rubber impellers...
The 3M Perfect it line is the best. But there are like 10 steps if you go through the whole process... A ton of CC guys have done it and damn, the results are stunning. You can use their boats for...