Search:

Type: Posts; User: michael hunter

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    22
    Views
    6,618

    Deck is done time for carpet I went with navy...

    Deck is done time for carpet I went with navy blue to go with the blue on the hull .

    https://i.imgur.com/r599uC9.jpg?1

    https://i.imgur.com/HcM0Lqu.jpg?1

    https://i.imgur.com/BeCoob7.jpg?1
  2. Replies
    22
    Views
    6,618

    Dragged it back into the basement workshop took...

    Dragged it back into the basement workshop took the cap back off to finish the glass on the floor and install the foot well . I had to put the cap back on because the floor was so hacked and rotted I...
  3. Replies
    22
    Views
    6,618

    New deck is fitted had to use 3/4'' 5/8 '' is...

    New deck is fitted had to use 3/4'' 5/8 '' is nowhere to be found . 140.00 per sheet Lets Go Brandon. Test fit the upper hull before glassing in the floor . Fit is good but top cap will need to...
  4. Replies
    1
    Views
    63

    Sounds like the forward clutches are worn out ....

    Sounds like the forward clutches are worn out . the trans will have to come out and rebuilt or replaced.
  5. Replies
    22
    Views
    6,618

    Stringers rapped with fiberglass mat ...

    Stringers rapped with fiberglass mat

    https://i.imgur.com/ZYILkB4.jpg?1

    Installed closed cell foam and started the deck

    https://i.imgur.com/gqghNWx.jpg

    https://i.imgur.com/GDlLSAe.jpg?2
  6. Replies
    22
    Views
    6,618

    Got all the fillets done yesterday next step will...

    Got all the fillets done yesterday next step will be glassing them to the hull.

    https://i.imgur.com/E0UF3nY.jpg?1

    https://i.imgur.com/7jM531Q.jpg?1
  7. Replies
    22
    Views
    6,618

    Just scribe and test fit a hundred times . I get...

    Just scribe and test fit a hundred times . I get them to fit within 1/8'' or less then epoxy them to the hull
  8. Replies
    22
    Views
    6,618

    Got the port side stringers built and installed....

    Got the port side stringers built and installed. Next step is fillets then glass mats.

    https://i.imgur.com/vMfM8R8.jpg

    https://i.imgur.com/nOWwxyE.jpg?1

    https://i.imgur.com/3nnF5Eo.jpg?1
  9. Replies
    22
    Views
    6,618

    Finished the right side stringers epoxied them to...

    Finished the right side stringers epoxied them to the hull.

    https://i.imgur.com/vOqmxDR.jpg?1

    https://i.imgur.com/IjOQ9sF.jpg?1

    https://i.imgur.com/VL2KxRf.jpg?1
  10. Replies
    6
    Views
    2,669

    I am currently rebuilding a 85 comp and just...

    I am currently rebuilding a 85 comp and just picked up a 74 Correct Craft Martinique lets call it 2023. There is no more room at the inn.
  11. Replies
    22
    Views
    6,618

    Work continues first two stringers are made and...

    Work continues first two stringers are made and coated with CPES yesterday I epoxied them in . Also I found the backing for the rudder was totally rotted away. So far every piece of wood in this boat...
  12. Replies
    22
    Views
    6,618

    Started shaping the stringers they have to be...

    Started shaping the stringers they have to be scribed and planed to fit the hull.

    https://i.imgur.com/hGj21Ov.jpg?1

    https://i.imgur.com/mgjAmep.jpg?1

    https://i.imgur.com/v6WKPWj.jpg?1
  13. Replies
    22
    Views
    6,618

    Work continues on the stringers . I got one side...

    Work continues on the stringers . I got one side removed and hull sanded down to install the new stringers. All the backings for the swim platform and the rudder are rotted out more cutting and...
  14. Replies
    22
    Views
    6,618

    Wife has started the upholstery. We are going...

    Wife has started the upholstery. We are going with the original rainbow color theme.

    https://i.imgur.com/ZmH14XS.jpg?1

    https://i.imgur.com/b5HDFpP.jpg?1

    https://i.imgur.com/IjERhrK.jpg?1
    ...
  15. Replies
    22
    Views
    6,618

    https://i.imgur.com/kFclftT.jpg ...

    https://i.imgur.com/kFclftT.jpg

    https://i.imgur.com/TzRhgsf.jpg?1

    Here is the 67 Mustang
    https://i.imgur.com/FTSoowy.jpg?1
  16. Replies
    22
    Views
    6,618

    85 Comp Rebuild

    Two years ago I picked up a 85 Comp with a nice hull but interior was toast and stringers and floor was the worst I have ever seen. The price was right and I was looking for another project . At the...
  17. Replies
    7
    Views
    7,953

    Oil unlike a banana oil doesn't go bad by...

    Oil unlike a banana oil doesn't go bad by sitting. I would read the owners manual and follow the maintenance guide in it.
  18. Replies
    0
    Views
    1,597

    steering cable

    I have a 1989 Sunsport I need to change the steering cable . I cant find any numbers on the old cable . Does anyone have the cable number for this application ?
  19. A guy I know was going to restore a 60 's wood...

    A guy I know was going to restore a 60 's wood boat pulled the thing apart said he had the engines rebuilt and lost interest . The boat was stored outside next to his shop for years it was junked...
  20. Replies
    17
    Views
    9,076

    I have a 89 with a SMP trailer the bearings are a...

    I have a 89 with a SMP trailer the bearings are a stock Item but the races are different from what you will find in most sets. Here are the numbers for my trailer.
    Inner bearing L68149 Race L68110...
  21. Replies
    4
    Views
    2,339

    Make sure you have the proper licensing and...

    Make sure you have the proper licensing and insurance you will be liable for everyone you take out.
  22. I have two Chrysler marine 383's with...

    I have two Chrysler marine 383's with transmission's and V drives for sale. PO said they were rebuilt they both have compression and oil pressure.

    https://i.imgur.com/3TgZr9W.jpg?1
    ...
  23. Replies
    18
    Views
    12,730

    I bought my Sunsport Classic 6-20-89 for...

    I bought my Sunsport Classic 6-20-89 for 21,800.00 after tax and fees 22,925.00 out the door. Still looks and runs the same with the exception of the ND tower and stereo I wonder if there will be...
  24. Replies
    2
    Views
    2,085

    Take the prop off and place it on a flat surface...

    Take the prop off and place it on a flat surface . Make sure all the flukes touch at the same place on both sides. Look at the strut and shaft make sure they are centered in the shaft log. With the...
  25. Welcome to the forum.

    Welcome to the forum.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4