I rebuilt my indmar 325 with a decent valve job, mild porting and flat top pistons. I have just over 100 hours on it and it was a huge upgrade. The boat also had nearly 2000 hours on it. It needed it...
Type: Posts; User: Brian_289
I rebuilt my indmar 325 with a decent valve job, mild porting and flat top pistons. I have just over 100 hours on it and it was a huge upgrade. The boat also had nearly 2000 hours on it. It needed it...
https://uploads.tapatalk-cdn.com/20210729/161b3751f2fa2f5eac1d9a64966ea15f.jpg
Make sure you order the two wire auto closing version!
Sent from my iPhone using Tapatalk
Just upgrade the manifold from the sprinkler valves to the electric actuated ball valves. I can fill mine in a lot less time than it took with the old style valves. And it was a cheap upgrade. I’m...
I had to post this here. It might be worthy of an award. I think the last five failed water pump impellers were in there...
A full rebuild and new prop made mine feel a lot more powerful
Sent from my iPhone using Tapatalk
I’m looking at the wake-worx super surfer system and the go surf assist system. Can anyone here with first hand experience comment on them? It seems like a nice upgrade but I’m curious if it’s worth...
Thank you!
Sent from my iPhone using Tapatalk
My boat is really working hard when surfing. When it’s not surfing and loaded down it’s pretty fast. I’m still breaking in a new motor so I haven’t run it flat out to find top speed, but I’m getting...
https://uploads.tapatalk-cdn.com/20210613/e31bf05df9eda638130682ad4f9dbd5e.jpg
Can anyone confirm if these will fit in an 06 21v?
Thanks.
Sent from my iPhone using Tapatalk
Sounds like a good way to rule it out! I’ll try that next time.
Sent from my iPhone using Tapatalk
One thing I wanted to say here about this project. If anyone ends up having their engine rebuilt, having the rotating assembly balanced is worth every penny!! I have never seen a 5.7 run so...
Full throttle does make it start much easier, what does that mean? And anyone with the anti vapor lock kit from indmar, could you confirm the part number on the electric fuel pump? I installed one...
I have a freshly rebuilt 06 indmar 325. It fires up instantly when cold. It seriously catches on what seems like half a rotation of the engine. Once it’s warm and you shut it off it cranks for 45...
I didn’t get into any wiring thankfully. That sounds like a project
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20210607/3a0a6551e222835a37a155cbd3ce8403.jpg
https://uploads.tapatalk-cdn.com/20210607/9bee533bb15706c12f8fee1ada172622.jpg
Tomorrow it finally sees the water!
...
I just got my new style brackets and mounts but they didn’t come with pins. I searched high and low and can’t find anything specific for the updated brackets. I’m about to buy a stainless nut and...
It sounds great. Haven’t been on the water just yet.
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/20210527/a8222f5311017fc4067fa3c88b37bc89.jpg
https://uploads.tapatalk-cdn.com/20210527/9ccdc23945363a84f80a0cc5e3eb4d5e.jpg...
https://uploads.tapatalk-cdn.com/20210527/a2c812ab15612f386bc49de0b29caad4.jpg
https://uploads.tapatalk-cdn.com/20210527/936e9bfc5ac209681cf2309aad1dfcbc.jpg...
Bad connection, I ran the power wire right to the battery and it works fine. I had to remove all the wires from the buss bars under the dash and clean and grease everything. Salt life was not good...
Well, after a long wait I finally got to see my platform installed and put to use.https://uploads.tapatalk-cdn.com/20210502/5f830d60031f242530b07a4b5ea5c7e9.jpg...
I got my upgraded stargazer perfect pass today and got it all installed. I haven’t had the boat on the water yet as everything is still going back together since the rebuild.
It’s the drive by...
Update, I got my hands on the rinda scan tool after striking out for a few days. Turns out my “brand new” crank position sensor was bad out of the box. Replaced it and it runs now with no issues.
...
Yes the fuel pump primes, and then while cranking it runs also. I did go back and look again and I do have +12v on one wire for each injector. The other wire is dead even when cranking. I discussed...
Hey guys, fresh rebuild here on this boat and I have most of what I need to run. It is MEFI 5 for starters, I have spark, it cranks over, timing is correct, fuel pressure at the fuel rail. My...