Happy New Year folks!
To recap - in April 2010 we paid Viking Marine $4000 US as a deposit for a boat lift. Here we are nearly 3 years later sans the lift or money....
Just wanted to let you...
Type: Posts; User: keithf
Happy New Year folks!
To recap - in April 2010 we paid Viking Marine $4000 US as a deposit for a boat lift. Here we are nearly 3 years later sans the lift or money....
Just wanted to let you...
Hi, if you are considering buying a Viking boat lift (www.vikingboatlift.com), be aware that unfortunately we, and others, have had a very poor experience with this company.
It has been nearly 15...
Hi, my 2002 SSV's center window shattered (for some unknown reason - this was while it was in my closed, locked boathouse) and needs to be replaced.
I called the local Supra dealer for advice, and...
Here's the 2nd pic - can only add 1 per post.
PS! I think this mboard has a bug when downloading pics attached to posts. I can only get them to display if I save them first - clicking open does...
Hi, need some advice. I have a 2002 SSV with 200hrs, and the engine cover is warping badly, where the gas strut attaches to it.
It appears that the strut is too powerful for the sheet metal...
Hi, any-one been there done that and have some pointers?
I have a 2002 SSV with <200 hrs on it, and I have about an eighth of a turn of freeplay at the steering wheel. This makes driving a...
See if this helps: reach behind the guage, loosen the trim ring holding it in place, and turn the guage 90 deg clockwise.
Now it is in the same plane as the plate itself. So when the needle is...
You can buy them from Rinker's in Houston - I bought mine there last year. Their details are here - http://www.rinkersboatworld.com. Ask for the parts dept.
Thanks for the nice boat comments...she appreciates them.
for trailer guide and you'll find the post with pics, etc.:)
You must have a water inlet in the hull. Buy a fake-a-lake - here is an example - http://www.overtons.com/cgi-bin/overtons/order/pdetail.cgi?32740++. I use this with my SSV.
If you have a...
Brian, thanks for the reply. Ok, so I just keep using the ballast system until my dealer contacts me? Sounds good! Thanks! Keith.
Hi SC, not sure if you are aware of the Rule pump safety issue - http://www.rule-industries.com/press/livewell.htm
I have one of these (1100GPH Rule 205) in my '02 SSV as part of the factory...
Hi Jay, could you have some-one sort out the bulletin board date format - I vote for a change from DD-MM-YY to USA MM-DD-YY?
Also, the clock is wrong .....:)
Thanks! Keith.
FYI to those wanting to do this. It's easy if you understand electrical wiring. Brian faxed me the relevant wiring diagrams, and voila. If in doubt, use your dealer and have it done properly, etc....
My dealer had them listed for $56. I got a nice discount.....thanks Chris!
Ok, here are the pics. Note I'm only going to leave them on my site for a month or so. This BB does not allow pics to be uploaded, only a link to a pic is allowed.
...
Yep, they do. I bought a set today from my dealer. They are black with a white SUPRA on them. I can take a pic tomorrow and post it.
Thanks Brian. I've sent an email to you at [email protected]. Regards! Keith.
Hi, I am busy adding the '03 SSV steering wheel wakeplate switch to my '02 SSV. I'd apppreciate a pointer on the wiring. Maybe Matt Brown can assist here?
I plan to leave the existing wakeplate...
Pu it all the way up to create a bigger and steeper wake. This makes the boat's effective length shorter, which will make the hull and transom sink deeper under power.
Now put some ballast back...
I have an '02 SSV with the factory ballast. The inlet pump seems to be just above the waterline.
If you trailer then the water will run out between the inlet and the pump itself.
For the pump...
Thanks for the replies!!
Keith.
I was hoping for an answer by now for my simple Q above.
Is the factory prop an OJ 14x 18x LHx 1.1/8?
I saw that somewhere else but need to confirm it before ordering.
Thanks! Keith.
Hmm, the first post showed up as Guest with no message...lemme try again:
Hi, I plan to purchase a spare aftermarket Nibral prop for my '02 SSV.
Can you provide the standard Nibral prop specs...