sold. thanks.
Type: Posts; User: The Squeaky Wheel
sold. thanks.
Kvand...
We pointed 4 lights at the rider and used 2 ahead for navigation. They all rotate independently and are wicked bright. Plus, there's a lower wattage bulb that shines directly down into...
corrected....thanks
FS: like new Roswell Spectra c6 light bar. Purchased mid summer 2011 and hardly used. I sold my 21v and no longer have need for the light bar. Features 6 independently rotating lights. Bright like...
That's because it doesn't. I'm guestimating the 1100 bag can be filled to around 900lbs safely. That's why I prefer the 750 lb bag which can't cause problems.
Interesting...how do I test that theory?
The autobilge on my '09 21 v fires fairly often when the boat is up on plane. It doesn't bilge when at rest.
Would the propseal be the most common suspect? How could I check and adjust it if...
Yes indeed.
Happened to me.
Bag filled, kinked the overflow line, cracked the fiberglass from the inside like an exploding egg. It resulted in $500 of fiberglass repair, not to mention the...
I've dislocated both snow skiing, and had both reconstructed.
Surfing only for me. I've put my speed water sports behind me but have never had more fun. Surfing rocks !
1 cubic inch of water =0.36 pounds
I forget the dimensions of my custom bag, but a significant amount of the weight is in the arm which runs under the seats.
You may want to give Wakemakers a...
For the sake of comparison, my wife rides goofy and I couldn't make the same mod on the goofy side for a variety of reasons.
I replaced the stock bag with a 750. The stock 400 lb bag is on the...
My least favorite part of my 09 21v are the stock rear lockers. They have plenty of potential, but there's lots of superfluous fiberglass edges which limit the locker size. I cut out all nonessential...
What boat?
On my 2009 21v, i run the plate at 80% on the gauge. Higher than that and the wake turns to foam.
I have 1400 lb in the port locker (i cut out fiberglass and had a custom bag made),...
What brand?
You have a website to look at?
Are these LED/halogen etc?
Does the power splice into the stock top nav light for quick hookup?
cost?
thanks....
edit: just realized you're...
My stock was an Interstate Cranking battery. I added a deep cycle for the stereo & amps.
boat '09 21V
I'm looking to add a powerful light bar to my '09 21V.
I'd like to use it some for evening navigation, some for surfing - may also add transom lights as well.
I'd like to keep cost under $1000....
Sold !!!!!!
Timely post, as I'm trailering from No Colorado to Lake powell in a month.
Sounds like I'll be taking mine off......
Day 2 on the v2 Swallow. i'm LOVING this board !
http://www.youtube.com/watch?v=vBpeGdAGC7I
It's taken awhile for me to get my wave where I want it, but I'm pretty danged pleased !
2009 21v
Goofy wave:
10.2 mph, plate at 80%. 1150 lbs of surf side rear water ballast (750 in locker,...
make me a reasonable offer.....:cool:
Brett,
Anything to prevent you from considering dual 2 5/8" forks?
Does the aluminum billet for the CNC get too expensive at that point?
sounds like there may be a market for it.....
Followup: I spoke with Brett today. The StarOne/Menace forks are 2", so taking into account the vinyl, Mike's measurement sounds accurate. So perhaps not wide enough for the beefy foam type boards...
I'll measure mine tonight....thanks for the update
Mike, what brand boards do you surf that are that thick?
Patrick,
As memory serves me, the Menace aka StarOne surf forks are 2.5" wide.
I have no problem holding Inland Surfer boards or a CWB Razr which are pretty thick.
I dealt with the sales manager...