Hi, Well, I was trying to get my '86 Conbrio running but the carburetor was fouled. And yes, I made the mistake of pouring a little gas into it. And yes, the carb. caught on fire.
The damage is...
Type: Posts; User: Tonymozingo
Hi, Well, I was trying to get my '86 Conbrio running but the carburetor was fouled. And yes, I made the mistake of pouring a little gas into it. And yes, the carb. caught on fire.
The damage is...
Tried 30 mins to figure out how to send a pic to no avail. I’ll report back later. Thanks for hanging in there with me.
Ok. Thanks. I’ll check both.
Where is thermostat located?
First, thanks to all who contributed advice as I rebuilt an ‘86 over the winter. It runs well. However, I have a new problem.
The engine overheats soon after cranking. I replaced the impeller and...
Please help me
I’ve installed new carb, new distributor, fuel line, filter and pump, plug wires, plugs, and wiring harness. I think I have it wired up correctly and I have it 8 degrees before TDC. I have the rotor...
Trying to delete post
I’ve received my new distributor and carb and am ready to attempt setting the timing. I’d appreciate someone helping me or referring me to a site I can go to for learning how.
Is there a tutorial...
I am so glad for this advice. There’s no sludge, but whatever additive or ? The previous owner put in definitely broke down. The fuel has a peculiar smell and a reddish tint. I’d hate to know I ran...
Any tips on siphoning? I can’t get the remainder; it’s still half full. Is there a certain shape of the tank preventing the hose from reaching deep enough?
89 Supra has been on rack for ten years. Almost full of gasoline.
I’m installing a new carb.
Question: Is there a reasonably easy way to drain the old gas from the tank, and if not, what should I...
I took your advice and ordered from Skidim. Great folks. New carb and distributor coming. Thanks again
Maybe I should dismount and replace the one I bought
You won’t believe this, but I threw the old one away.
I am so ignorant to do that.
Any other suggestions? I get what you said about the wires and manual choke
Thanks, Michael.
One last question and I’ll stop bothering.
I bought a Holley carb to replace the old and when I mounted it, I noticed it did not have the two prongs for the pos and neg elect....
Hattiesburg, MS
Starting this thread because I need the info. ASAP.
Thanks in advance.
I’m replacing the distributor because it had points. Took the old one out already.
What are the parts ID numbers for new...
Yes. So I took the entire distributor out and am looking to replace the old with new.
Would you please advise where and how to order a new distributor and cap,etc?
My O’Reilly’s guys can’t find...
Man, that must be it. The wire from the dist. cap was melted onto the coil and half that bond looks burnt.
I really appreciate it, sir.
That’s it! Could that be the reason I’m not getting spark to the plugs?
Hi, I have an ‘89 Supra 351
PleasureCraft. It’s been sitting for many years. I have it turning over and have determined it’s not firing.
I suppose I’m correct in replacing the next part down the...
I want to buy a platform and brackets for my Supra. The original was white fiberglass or plastic.
Crystal, That’s is the same boat model and color as mine.
1989 Supra PleasureCraft 351
I’m happy to report through the members of this forum, I’ve gotten it wired correctly. Thank you.
...
https://forum.supraboats.com/images/attach/bmp.gif
Many thanks sir. It’s A pcm 351. Supra. I think 1990.