Thanks, I'll run it longer and look at the manifolds. If they are cracked, can they be welded?
Type: Posts; User: TX skier
Thanks, I'll run it longer and look at the manifolds. If they are cracked, can they be welded?
I found water in the oil after the summer, bringing it home to winterize in the fall. The oil looked like chocolate milk. Did not look this way in the spring.
Today I went over to the lake and...
Done. Thanks for your help in all of this.
David
99 Santera
How can I print this to take out with me? I have already replaced the MDC, not doing that again. The temp gauge pegs hot, the oil pressure jumps all over. I worry and the engine runs fine...
...
I have had one for 6 years. The wake is not great, but it is manageable, even at 15 off and 34 MPH.
Ours is a 99, and has had no problems, other that the occasional impeller.
Lots of room...
Shakedown cruise before we hoped to head to the Southern Reunion this weekend...
1999 Santera, obviously a v-drive.
Water is dripping from the raw water pump, the side toward the engine. The...
Any interest??
Well, How about 16,500???
This boat brought our family tons of fun, but having 2 teenagers now with other interests, means less time for the lake.
Please look at the ad below and see what a great boat it is!
...
Trying to get to Wedowee to take some. Hopefully this week...
Well, the poor boat has been in the shed way more than in the water.
I guess busy teenagers get in the way of family time on the water.
So I guess we may be looking to sell our Santera. It...
Try 6one6 850-8o15 Cheryl Crane is who I dealt with. Maybe a Bob also, I can't remember.
David
OK, thanks. It runs great so I guess I will keep on!
I have a 99 Santera with the fuel injected Indmar.
It seems one side of the exhaust manifold is somewhat warmer than the other. Is there any way to backflush the cooling system? I replaced the...
I have a 1999 Santera with the Medallion gauges. I have had to replace some of them.
Call Medallion, tell them what you have and they will help you out.
Good Luck,
David
I had to print that to show her. Loud laugh, that's about right. Doesn't care about us, but the boat gets every thought.
Guess she forgot she picked out the boat!!!
David
99 Santera
Call Medallion directly. Much cheaper to buy straight from them.
Good luck, David
They are probably Medallion Gauges. Seems they get all the info from the MDC. Google Medallion Instruments for more information.
Good luck,
David
I have a 99 Santera. Had some gauge problems, and replaced the MDC, and they work.
Call Medallion Instruments and buy from them.
You can also unplug each gauge, one at a time, and see if the...
Go to Craig's Canvas down in Buford. He just did one for my Santera off the Monster Tower, works and looks awesome.
David
I have a 1999 Santera, it does not have a wakeplate on it.
I don't know when they appeared.
David
I found it. Thanks for the help, I'll order tomorrow!
This is the block that holds the outside still while the inside moves. The angle that is held down by the strut bolts was loose. I tightened it up. The bolt that holds this block to the angle...
After shaking the rudder, its fairly loose. Play in every direction. Everything connected to the steering wheel, rack and cable seems to be tight, no play.
What parts and where do I find them...
OK, I have read some about some steering problems, here is mine.
The boat is a 1999 Santera, I have had it 2 years. To go straight, it takes a quarter turn left. No big deal. Last time out,...