https://www.youtube.com/watch?v=s2Yy4lHK5nA
https://www.youtube.com/watch?v=bsT6BwNuxoo
Type: Posts; User: 2500HD
https://www.youtube.com/watch?v=s2Yy4lHK5nA
https://www.youtube.com/watch?v=bsT6BwNuxoo
Mines still going strong, Love it!
Throttle position sensor.
Just do 1/4 turn at a time. In theory you shouldn't need a wrench but the facts are that you will need one. even if you need to replace the packing it's like most things. Easy to do but a pain to...
Throw away the mdc. Here is my thread, Same boat.
https://forum.supraboats.com/showthread.php?17208-medallion-mdc-1600-delete-and-head-questions
I would check your throttle position sensor. Also install a fuel pressure gauge up by the intake and see what it reads when this happens. I'll bet the pump is fine but this is the only way to know...
Gettin closer.
you canrun your boat on land if you have a hose to wet down the strut and the shaft through hull.
Can anyone in Colorado recommend someone for a snap on cover?
Take your head to a shop and have them pressure test them. This will tell you if you have a small crack or not.
agree with dutchman, the tabs lengthen the wave without the need for bow weight. my boat doesn't have a bow bag so all the weight is in the rear. Both 750's puts out a nice wave but add another 500...
Search is your friend
https://forum.supraboats.com/showthread.php?14955-DIY-Wake-shaper
I think i started these on page 9
What lively said.
http://www.rockauto.com/en/moreinfo.php?pk=1111766&cc=1432495&jsn=540
I would almost guarantee that the map sensor is bad or has a bad connection. I had a bad one on my 260z and it ran really rich and backfired. There is a way to check the power supply to it but i...
efi is easier to work on than you think. I put a 2004 4.1L in my 74 260z and the efi is awesome to work on, so easy.
Were all the plugs that aren't firing on one side of the Block? If so then your...
My best guess without codes is the map sensor When they go out they tend to run really rich.
The blue sea is a perko switch. Just a different manufacturer. And you didn't answer his question. I don't have a dual battery set up so I'm no help. Sorry
I forgot to add that 5x9 was the most you needed to get the gate to work. One other tip is to tie it to your tower with the tab side facing forward and use a clay bar to remove wax or lake slime from...
With the size of your boat and the amount of weight you can add i would just build a suck gate. we just built one for my buddies 05 xlv moomba and with both rear 1100 bags half full and his center...
For what it's worth, with my old saltare about for years ago my gate was really shallow angle maybe 14 degrees. wake plate was up just a little from neutral. weight was even and about the same as...
Raise your platform or build a new one, it is squashing your wave and the upforce on it is stripping out the screws.
New prop will only make the boat better it will have 0 effect on wave. Even prop rotation has little effect on the wave. Its actually the scags under the boat that dictate which side of the,boat the...
left click a section then right click and select print
Yes, coils can fail immediately. Cheap enough to replace. I also think some auto parts places can check them for you.