The only real fix is to install a secondary fuel pump between the fuel tank and current fuel pump. Install it as close to the fuel tank as you can so the pump is away from the engine(heat source). ...
Type: Posts; User: dndsam
The only real fix is to install a secondary fuel pump between the fuel tank and current fuel pump. Install it as close to the fuel tank as you can so the pump is away from the engine(heat source). ...
Below is a link to the list of AWSA approved ski boats. The 1999-2001 Legacy's were AWSA approved, but not the 2002 as it did get bigger in size. I have a 1999 Legacy and would not trade it for...
22' off is 22' off a 75' rope so 53' is the actual length of the rope.
Sounds like vapor lock to me. I just installed a second fuel pump on my fathers 2006 Launch and it solved the issue in the Texas heat. Ethanol has a lower boiling point than gas which creates the...
I can't help you on the floor issues other than when you get it done, it looks like you will have a nice boat. Cosmetically from the pictures, she looks to be a beauty. Just a little TLC and a new...
Check with this company. My nephew recently got one for his 92 Mastercraft. It wouldn't suprise me if they are the OEM's based on their location.
...
Corvette on water! Powerful, responsive and can't beat the sound of an inboard. Nothing compares.
I removed my Boat Buddy on my 1999 Legacy for the same reasons. It did not work well at all. I put on a Stolz non-marking roller to replace the Boat Buddy. I have been very happy with it.
Beautiful restoration job! You must have a ton of patiences and a lot of skill. Keep that boat dried out after each use and that wood will last a LONG time. Thank goodness the most boat...
Awesome restoration! You should be proud! If you get a chance, post a few pictures of the outside of your boat.
I would be willing to bet the rope will give way before the pylon mount, unless you are using a cable. I don't think I would use the rear tow hook eye but the rear lift rings would be an option,...
I have a 1999 Legacy which is pulled behind a 2002 Ford Explorer with a 4.0 liter V6 and towing package. Included in the towing package is a posi-trac rear end, 3.73 gears and a transmission cooler....
Another trick is to almost idle through the wake side ways. Let the boat roll side to side through the boat waves. Like the others have already said, give it a quick burst of throttle to get the...
If it is a through hull transducer, it is probably mounted around the engine compartment, usually toward the rear of the engine. If the transducer has come loose you will have to remount it to get a...
Has anyone received a new set of Warning Decals for their older Supra's? I have a 1999 Legacy and received mine yesterday. After seeing the new decals, it appears there has been a driver for this...
Good Looking Supra! Very clean and babied I'm sure. You have to love the looks of 80's Supra's. I knew in '84 when they came out I was going to own a Supra one day. 18 years later, I bought my...
I knew it. Thanks for the constructive response. You probably think Chevy's swallow too, huh?
It appears that Chevrolet's are becoming the predominant engine for PCM and Indmar. Anyone have any insight as to why? The obvious is the amount of horsepower being cranked out of the Vortec heads....
The cover has been SOLD!
I bought mine from Ski Limited. It is a Taylor Made Ultima and it works great. Samples of the material were even sent to me upon request so I could decide on a color prior to purchasing. I had a...
What is 303?
I understand the sitting around in the garage part. If we do not get some rain this spring here in Texas, that is about all we will be doing. Listening to my new speakers in the...
Does anyone have any secrets on cleaning the vinyl on our Supras? I have a light grey interior and it seems to dirty looking. I typically use Tuff Stuff and it just doesn't touch it. Any tips would...
I have converted over to Supra from Mastercraft. I love my Supra boat but the gear has always been a step behind MC and Malibu. I think the 8 stars t-shirt is a step in the right direction. There...
Ed,
You are on the money in regard to the straps. As posted earlier, you must tie up the loose ends to keep the straps from touching the gel coat. I usually tie them back into each other with...
Make sure the BUCKLES do not touch the gelcoat. Straps are fine, just do not let them flap in the wind. A twist in the strap before you buckle it will prevent it from flapping. Tie off any excess...