Search:

Type: Posts; User: michael hunter

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. A windshield mounted bimini is too low to be...

    A windshield mounted bimini is too low to be useful kinda like sitting in a cramped car. I chose to increase the size and height of the bimini to actually work. I had to drill 4 holes just behind the...
  2. Replies
    5
    Views
    113

    Looks like a Sunsport to me . Danial you want to...

    Looks like a Sunsport to me . Danial you want to take this one?
  3. Replies
    5
    Views
    263

    If I could do it safely I would take it with as...

    If I could do it safely I would take it with as many other valuables packed inside as possible. Insurance is fine but they will not pay out the same as what the new boat will cost.
  4. Replies
    30
    Views
    13,539

    Do you still have to lean the boat to the side to...

    Do you still have to lean the boat to the side to surf?
  5. Larry Arizona you are absolutely right about the...

    Larry Arizona you are absolutely right about the divide between the old Supras and the currant models. The only thing they have in common is the name . They aren't even made by the same company....
  6. Check with skidim

    Check with skidim
  7. Replies
    20
    Views
    492

    Back in the late 90's Harley Davidson was so hot...

    Back in the late 90's Harley Davidson was so hot and in demand you could get more than you paid . That only lasted a couple years until supply met and then exceeded demand today they almost worthless...
  8. Replies
    20
    Views
    492

    You haven't seen the 2021 Megasurf it has...

    You haven't seen the 2021 Megasurf it has everything including the kitchen sink.

    https://i.imgur.com/ZA3Xebh.jpg?1
  9. No offence taken the new boats are built for the...

    No offence taken the new boats are built for the younger generation I'm an old guy that likes his old boats. I would bet if you asked your father of grandfather about buying a 175k boat to surf they...
  10. Replies
    20
    Views
    492

    Yep that's me the butt hurt troll and its true I...

    Yep that's me the butt hurt troll and its true I cant afford a 175k plus new boat I cant even afford the yearly deprecation on it? Fortunately I already own all the boats I need. If you want to Pay...
  11. All my 85,89 and 92 have is the sweet sound of a...

    All my 85,89 and 92 have is the sweet sound of a direct drive V8 and yearly cost of operation less than the cost of a Gussi steering wheel?
  12. Replies
    20
    Views
    492

    Today's surf ships are too big, too full of...

    Today's surf ships are too big, too full of unneeded electronics and needs an engine that could move the titanic just to get out of its own way. Not to mention the tsunami size wave they make to reap...
  13. You can do that but they are only used one side...

    You can do that but they are only used one side at a time . The cheapest way is with a suck gate and move it to the opposite side you want to surf.
  14. I have had to replace the barrels on the back...

    I have had to replace the barrels on the back side of the shifter but that was on a 67 correct craft . I would start at the transmission . Remove the cable from the shift lever . Move the lever to...
  15. Replies
    9
    Views
    421

    The 95 Nautique has a horrible ski wake like...

    The 95 Nautique has a horrible ski wake like hitting a curb . When they came out with the 196 in 99 things got better for Nautique 2002 to 2008 were the best years for the 196 . In 2009 the 200 came...
  16. Replies
    14
    Views
    6,644

    89 Sunsport New dimensions tower...

    89 Sunsport New dimensions tower
    https://i.imgur.com/aj7PxQD.jpg

    https://i.imgur.com/UVgpfc8.jpg
  17. Replies
    1
    Views
    130

    I have a pylon assb out of a 86 comp. Where are...

    I have a pylon assb out of a 86 comp. Where are you?
  18. Replies
    5
    Views
    336

    The dealer can order that for you.

    The dealer can order that for you.
  19. Replies
    2
    Views
    207

    Pro tech is a evil word . Its probably the...

    Pro tech is a evil word . Its probably the ignition . Problem is no parts available anymore. If you do a search on google you might get lucky other wise your only option is to convert it.
  20. Replies
    3
    Views
    251

    If that is all that is wrong I would recommend...

    If that is all that is wrong I would recommend just removing the whole carburetor then you can get access to the 4 screws that hold the accelerator pump on. Try not to turn the carb upside down so...
  21. Replies
    11
    Views
    472

    If the input shaft on the trans is spinning and...

    If the input shaft on the trans is spinning and the output is not check the drive shaft cuppler if its ok the trans has an internal problem . Its a 1 to 1 gear ratio.
  22. Replies
    11
    Views
    472

    It sounds like the damper plate may be broken it...

    It sounds like the damper plate may be broken it is the connection between the engine flywheel and the transmission input shaft kinda like a clutch on a car . If the damper is broken its a easy...
  23. Replies
    3
    Views
    205

    First when you shut down the engine when...

    First when you shut down the engine when overheated it probably pulled water into the cylinders and hydro locked the engine. When you tried to start it you killed the starter. Hopefully the rods are...
  24. Replies
    11
    Views
    472

    Pull the trans and make sure the damper plate is...

    Pull the trans and make sure the damper plate is turning the input shaft . If that is it its an easy fix .
  25. www.uscomposites.com is a good source of...

    www.uscomposites.com is a good source of materials and advice. After cleaning and grinding the stringer locations on the hull I put a coat of CPES [clear penetrating epoxy sealer] from...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4