Hey everyone. 1995 labrisa with a gt40 in it. Boat runs and starts great. After 20 mins of use the boat stalls and will restart instantly. It’ll be going and idles down then stalls. Any insight would...
Type: Posts; User: Cusefan78
Hey everyone. 1995 labrisa with a gt40 in it. Boat runs and starts great. After 20 mins of use the boat stalls and will restart instantly. It’ll be going and idles down then stalls. Any insight would...
Could be anything. You'll need to test the wires. Gauge could be bad or could be a loose connection
Make sure you get marine parts. I get all my stuff through skidim
Make sure there isn't wax build up or debris on the vent. Had that happen to me once
Let me know. My high pressure pump went bad last year and found the part was updated and the new pump wasn't right. Had to track down another manufacturer that made the same pump
The hole shot is nice. Last year I pulled 20 older heavy guys out of the water back to back and no one had a problem getting out. The other thing to check is the wake plate. There is a write up on...
Ok then find the fuel return line. Pinch it closed and see if it runs better. If it does one of your pumps was defective.
Have you changed the canister filter.
My labrisa has the 541 on it. I get 48 at wot. Never had a problem with
Torque since I changed to it. As for the cavitation are you sure it's not the tranny starting to slip. I had the exact issue...
I had an issue last year with the pump going bad. Check the relay to see if it's energized if you have power then it's the pump. There are two. A low pressure and high. I believe it was the high then...
It's on the back of the motor where the breakers are. You'll see the relays attached to the metal bracket
Let me know if you have any questions
If you have it apart already and there is any sign of wear I would do a rebuild. Discs and seals aren't that much and it's only a few hour job. Just be careful with the spring. Make sure you...
18147 a new disc is 2mm thick. What usually happens. Is they will either glaze over from spinning or the inside teeth wear out. I have rebuilt two of them. Pretty easy to do. I did a write up on here...
What's it doing? Oil have a burnt smell? The discs are easy to tell if they are bad. I'll look for a few new ones I have and mic them for you.
Yeah I called them yesterday. Only offer my color in a 1 gallon size. I picked up a kit today and going to bench mix it.
Does anyone know of a company that sells a premixed gelcoat kit other then spectrum. With the high waters something rubbed against the side of my labrisa and I have a 1"X1/4" scratch that's into the...
Thanks mike
Anyone know the fram fuel element number that fits in that orange canister. I left my cottage without looking for the number and I need a new one.
If you go to the service tab there is a prop page. Lots of info there. Here is a good page also. https://www.wakemakers.com/supra-wakeboard-boat-propellers I'm running a 541 and love it. I got a...
exactly. Honestly most people are going to look at a nada guide. Also you have another thing keeping from geting top dollar, the long cold winter that is quickly approaching. Most people aren't in...
So is your number 15k? Really hate when people do this. You have a number in your head just post it. It's a nice looking boat!
Go big or go home. Get one of these and you can never blame missing a ball on the ski again.
...
I went ten years without upgrading my old ho skis. I was running a monza and a system 8. a few years back I picked up a left over strada. Killer ski! Crazy how much technology has advanced the skis....
Sorry I just saw this. I'll be back up to my boat tomorrow and I'll look at my setting.