we have successfully surfed our Mariah for the last few years. I would put a 750 beside the engine and then a 400 on the Surfside seat in the back and another 400 sitting on top of the 750 and the...
Type: Posts; User: Kip
we have successfully surfed our Mariah for the last few years. I would put a 750 beside the engine and then a 400 on the Surfside seat in the back and another 400 sitting on top of the 750 and the...
we have had good luck surfing with our Mariah
1988
Supra Mariah
21 ft.
351W 775 hours
1:1
old Michigan Wheel
14x11 .080 cup
WOT RPM 3800
Hey Jasun
Glad you were able to get your new boat out before the end of the season. Now you get to start planning your winter projects:)
SOLD. CWB Marius Platinum 140cm in very good condition. Only a couple nicks/ scuffs from bindings and board racks.
$180 shipped
text me 260-438-0195
I just sent my 14 x 12 to be cut down and pitched to a 13 x 11. Hopefully this will do the trick for us for now.
D
If you decide to sell the 13 x 11 outright send me a pm. I am trying to get some more rpm's out of our boat and your prop might do it.
Derrick
Wotan. I spoke with the local prop shop and he thought I would pick up maybe 200-300 rpm by dropping down to a 13 in prop but still not putting us where we need to be. I do like the power out of the...
I am looking for some advice concerning our max rpm. We have a 88 Supra Mariah with the 351. the prop is a 14 x 12.
At wot we are only getting 3600rpm and about 38mph. It starts and runs very...
Haugy's got it right
I used the 3m eraser wheel and it worked perfectly.
The bimini has a stitched hole in it which the rope holder goes through. I can easily grab on to the tower and step up on the engine cover to hook up the rope. Although I was worried that the rope...
A good Tig welder should be able to fix most cracks. However if i had to remove my tower every time I wanted to store the boat I would be looking into a new universal tower. Also I would think...
That is definitely my tower. They must have though TL towers was not a good enough name.
I would go with a tower and board racks. Also a bimini if you are going to be out during the day a lot. Since these items would probably deplete the budget you can remove the old stickers and...
I put a TL wakeboard tower http://cgi.ebay.com/New-TL-Wakeboard-Ski-Tower-Universal-Polished-Aluminum-/280570859559?pt=LH_DefaultDomain_0&hash=item4153539027 on our 88 Mariah this past winter and...
Adjusting the wake plate makes a huge difference. We do a lot of skiing and wakeboarding, if the wake plate is in the wrong position for whatever activity we are doing there is no doubt I will drop...
My tower is a TL. They were selling them on ebay for through most of 2008 and 2009, but I have not seen them on there this year.
Here is a link to one on ebay right now.
http://cgi.ebay.com/BIMINI-TOP-WAKEBOARD-BOAT-TOWERS-/140458980002?pt=LH_DefaultDomain_0&hash=item20b401f2a2
I can also pm the email address for the guy...
I had been looking to DIY a bimini for our tower but ended up finding this one on ebay (seller - Wakepros). I had this one shipped to my door for $200. It is very functional but probably not as...
Thanks for the info guys
Mikey does yours use a single switch and do you have the indicators? If not do you wish you did have the indicators?
Where did you find the bennet kit?
Hi as the weather turns colder and it becomes apparent that there will not be too many more days on the water this year, I start to think about projects for the off season.
My main goal for the...
I use McGuire's marine wax (there top of the line wax). I waxed the boat at the beginning of the summer then once before each of our week vacations (2) in August. The water still beads up on the...
Ha Ha Awesome reply Jet. Also I really like the idea, I think there would be enough room to do it, but finding an enclosure like the one on the newer boats will be tricky.
Good Luck I will be...