14989
14990
Type: Posts; User: jshepp122
14989
14990
Next time you're in the area let me know, Im about 3 hours southeast of leelanau, SE Michigan
I agree, Im seeing them up for sale close to 10k in Michigan with 600 hrs on em. One ad was 12k just cause the guy put perfect pass in his 84 comp. I can't even get rid of my friends for 5k w 600hrs...
I have a friend who is a shipper :)
or I can deliver
I had the same problem, idled fine and ran in gear fine but trying to get over 20mph was a struggle. Come to find out after investigating I was starving it for air, higher grade gas burns faster...
Have you tried skidim? I just had to replace mine and bought them from there
1991 Supra Comp TS6M, 5.8L 351 Ford Windsor PCM 240hp, Power Plus 1:23:1 Transmission, 614 hrs. Dark blue/white. New speakers, New gaskets (valve covers, cylinder heads, intake, risers, manifolds)...
DEXRONIII/MERCON ATF is what I use
Just did mine last week, replaced the factory with faria chesapeake SS gauges. Faria makes a good gauge set along with teleflex. PM me if you have any questions
For both or just one?
Weather or not its factory on mine I have a plug under the dash with a chip/board on it that the harness is plugged in to, thats what skiers pier plugged in to to get my hours when I bought it. want...
The beam on a comp is 9' (roughly 108")
ok so you do have the hose clamps just no mufflers by the transom, good thing for pics
Awesome If it goes on next year I'll be there with the boat then
If you take it to a mechanic they can plug a machine in to the motor and see how many hours are on it, yea just search dealers in your area with the find dealers, you can try any boat repair shop...
You can take the boat to a dealer and find out how many hours on it, my guess is the rust that got to it ate the paint off, best bet is to find someone it happened to ( i think there was someone in...
My mufflers on the inside of the transom are rubber and hose clamped on both ends transom end and after the pipe comes out of the floor. comp when you take out the middle access do you see mufflers...
on my 89 comp its 6 inches forward from ski pole (9in from engine cover mount) and 4 inches over from the 6 in mark, that would be the center of the hole. your end location would be center of the hole
no, you have to remove the tank to get to the back of it. the front you might be able to reach, on mine you have about a inch or 2 between the floor and gas tank opening but getting to the back...
Supra did paint the bracket thats why Im not understanding why yours was not, was it replaced somewhere down the line or someone else worked on it? It might of even flaked off but they painted them...
I used lacquer thinner, got the crap in my hair too and came out with thinner, I use marine goop now its thicker and dries faster, 5200 is like water
Cut the piece of floor out along the stringers that run that way, before putting it back in because it was one piece put wood reinforcements underneath it just like the back panel area in back of the...
When looking at speakers you want to keep in mind its advertised at 700watts but thats peak power which you will rarely hit, RMS is your continuous power so that is the wattage you will actually get...
Its time consuming and costs a good amount of money for the conversion, not to mention if you did that it makes it easier for theft so you would want some type of fob in the boat so it wont start...
Theres not really a problem with doing that but its pointless if the purpose is to be able to remove or maintain them, to remove them there is a hose clamp in the back so you would still have to...