Search:

I have a feeling that is Smokin' Joe's Bar-b-Que?

I think 2013 was the year of 900# of hard sub-floor Liquid Lead Ballast and 1300# lbs of flex ballast (optional).

Usually, the center tank and bow bag (IBS) are controlled by one pump. There...

Covid shortage


Sent from my iPhone using Tapatalk

The pic above was from a 1989.

There was another guy with a 1989 comp that said he had the box, key, and cassette with a 3-ring binder with maintenance info. Along with three plastic containers...

I will find the post and ask him.


Sent from my iPhone using Tapatalk

I’ve seen the key to Club Supra.


https://uploads.tapatalk-cdn.com/20210219/d7145407d6484776542f9dab9a6f38f2.jpg


Sent from my iPhone using Tapatalk

Noticed this on social media tonight. Thought is was pretty cool. The guy was going to find a cassette player to listen to it.

Ever seen one or anyone have one?
...

Good for you. Boats will break, new and old. If you cannot or do not want to work on your your boat, better to build a relationship with someone you can trust.

It's a good method to have someone...

The 2006-2007-2008 should all be around the same price range. They made that boat until 2013, but I would assume the production numbers were low b/c everyone was looking for bigger surf boats.

I...

If you lived in charted, what fun would that be?

Sent from my P00I using Tapatalk

I have read posts about the tabs, but they have been mainly about the pump or trim tab cylinder not working. Usually people are just replacing with factory specified parts. Your going in uncharted...

If the impeller is spinning dry, it would be probe to cracking. When they start to go bad, the vanes will crack.

Sent from my P00I using Tapatalk

Didn't know how many of those pumps had some type of 'run dry protection'.

Never really paid attention to it.



Sent from my P00I using Tapatalk...

Thanks MLA. I was looking at the other Johnson pump. Wrong one.

Still amazed at the output of that thing.https://uploads.tapatalk-cdn.com/20210208/3cd671734785344f154b29e153a198c1.jpg

Sent...

I have Jabsco Pumps on my boat now and replaced them with Green from Wakemakers. They lasted 2 seasons. That is what most all people use.

Previous boat had Johnson. OEM was back, they did not...

One would assume if you have 25% more GPM, the lines would need to be 25% larger. I still think you will need to keep an eye if you see continuous water off the side of the boat.

I see what MLA...

I do not think there is a best shape or size. The output of the wave is a combination of:

1) Having enough ballast in the boat for displacement. On my 22' I ran 1100#s in the back lockers and...

I assume the thru-hull fittings from the factory are 3/4" from those model years.

Wonder what the bigger thru-hull would looks like next to the 3/4"? Usually they are mounted next to one...

I would not always rely on the timers. I'm more concerned about having the bags full.

If you had 1" fill and 3/4" vent lines, there is not that much of a difference of the diameter of the lines...

You need to grab the 21V manual. The "gravity games" edition was basically the same boat as the 21V, but with different decals, could have had larger ballast bags, etc.

If you look in the 21V...

I'm pretty sure MC still sells them . . .

Until you get 10 passengers with bags and coolers, then I'm betting you will be wishing you had a 24' boat.

Have you done any testings on the plates to look at the output - the wave it creates?

Looks like a set of surf gates (outward) with a ram and a set of tabs (up/down) with another ram? I'm not...

Do you have bigger vent lines - 1-1/2" hose?

Per the windscreen, if can find someone to measure the same model year for you, you might look into getting one made.

I'm not sure if that is a universal size or they have different sizes for the...