I'm comfortable with everything except the drive and fiberglass repair. I've got a ton of experience with Windsor Ford engines and boats in general, so I've been fixing stuff as I go here, but the...
Type: Posts; User: OVERKILL
I'm comfortable with everything except the drive and fiberglass repair. I've got a ton of experience with Windsor Ford engines and boats in general, so I've been fixing stuff as I go here, but the...
Sounds like an accelerator pump issue off-hand.
I have a buddy who's a marine mechanic who has indicated that he's comfortable doing it, so I'm going to give him a crack at it. Thanks for all the help guys :)
Per my previous thread where this was briefly mentioned, trying to get the issues sorted out with this boat that spent quite a stint in storage, the next major one, since the leak is now solved, is...
So, I want to thank you formally here. I lifted the boat out of the water this past weekend to check the exhaust. There was zero leakage from the exhaust, even when I tipped the boat back. I also put...
I know on the SEFI ones there are two switches one for oil pressure the other for coolant temperature that trigger a limp mode that limits RPM to ~2,500 if they are tripped. The one for the coolant...
When you say weak spark, do you mean what you see is sort of a weak amber spark vs the sharp blue you get when it is cold?
I ran my finger along a bit and it felt OK, but I haven't given it a solid look. I did that after I think I saw you mention it in another thread. My guess is that, since it still leaks while it sits...
My guess is exhaust system as well. Doesn't appear to be any sort of leak at the coupling/muffler interface and the mufflers are brand new stainless ones. I'll double-check where it meets the pipe as...
This bypass was done by the previous owner or his/her mechanic. It appears they've taken a cut out of the longer section of hose that feeds the heater core and simply looped it from the hot water...
We recently picked up a reasonably clean but needing some TLC 1995 Comp TS6M with ~400hrs on it. Part of the reason we were OK with the project was that research indicated that this...