Search:

Craig,
You are correct 13 x 13 means 13" diameter and a 13 pitch. We run the regular left hand rotation props. Nautique is about the only manufacturer using the right hand or reverse...

RKG,
As Rick stated (twice hehehe) there is not a lot of difference between the 02 and 01 SSV. If the 01 has the options on it that you want then I would jump on it. The hull and deck are...

Craig,
The factory system in your boat consists of 1-2000 gph pump for fill and 1-2000 gph pump for drain. If you want to check out whats going on you need to flip the rear seat up and remove...

Craig,
It is possible to tap into the factory ballast and run a hose to the front. There are a couple of ways to do that. You can either splice into the inlet hose and install a Y fitting or...

Kevin,
Not real sure on what we still might have on that year Saltare. When I get back to work I will check and see what I can find. You can also contact Anthony Cooper at the factory and he...

John,
I can't really remember that model year dash to well but I think the speedo adjust rocker switch was beside the horn button. Check and see if that is it. That should fix you up.

Good ride last night CLEO. Don't learn anything new while I'm gone! Fill you in on all the good times when I get back. Cya!

John,
There are 2 adjustment switches on the side of the dash that should allow you to fine tune the speedos. Are the rest of your gauges acting properly? If not you may have a defective MDC...

Tough question! There are a lot of good props out there and everyone will give you different answers as to which is best. Most 4 blade props will give you good hole shot and speed handling...