Doofus I will take some pics.
All it is 3/8" piece of stainless 5"x12" with 4 stainless bolts holding it to the original wake plate. I tried one with turned up corners (more pointed)that made a...
Type: Posts; User: FoiltechLaunch21V
Doofus I will take some pics.
All it is 3/8" piece of stainless 5"x12" with 4 stainless bolts holding it to the original wake plate. I tried one with turned up corners (more pointed)that made a...
Well...with my 21V if I load the rear down (I have custom made hard tanks 450lbs each side) with 3/4 full in the front (custom made 1500lb hard tank). Then set my plate at 3/4 UP. I ride at 27mph...
I agree with KG. Also If I want easy/quick adjustments I change my plate setting. (When it was a Stock plate)
I have added another piece of stainless plate bolted to my plate 5" wide that hangs...
GoodYear Marathons are terrible!!! I up-sized my rims so I could run 10 ply (load E) 16" Michelin truck tires. Have had no problems since. A little more $$$ but I'm not changing tires when I could be...
I guess this means you're not interested in buying the boat? LOL
To keep the thread on topic; There are a few people in my group that are wanting boats I'll see if I can help you move it. Nice...
RE: Hydrofoil=A day to get up on it. A couple days to "Fly" it. Landed the first invert within a month or two.
Tell him to get to a "fly-In" or find someone that rides it will take a LOT of bad...
Try this. I'm sure there will be a lot of opinion posted up. So choices will be unlimited. Enjoy!!!
http://waterski.about.com/od/wakeboarding/tp/beginnerboards.htm
I like 'em!!!
I was thinking the same thing. LOL
Yes It is a great idea!!! Especially on Lake Lots.
Todd it's been about 12 years since I've put in Radiant Floors,they were very expensive then I'm sure even more now. This would have been when I lived in Wyoming. Maybe I can come out this...
Let me know. This building 40 x 60 (2400 sq/ft) is only costing around 23k in material. 5k concrete, 5k wood, 2k roof trusses, 6k metal (sides and roof), 5k windows,doors,electrical,and plumbing. You...
825282508251
I was getting bored so I started a 40x 60 Boat Storage/Reloading Room. I really need a hobby.LOL
Traxx pad has been used on some of the boats I've been on. I don't know how long it will last though.
http://www.airjunky.com/traxxed/
Email Address: [email protected]
By Phone:
Phone: 512-837-7707
Fax: 512-837-7917
Store Address:
Nettle Props
Higher rpm's maybe a change in fuel consumption. I contacted ACME and Nettle's Props for what prop they recommended for the speed and weight that I had. They both recommended ACME #1235 for me. I...
This may take care of it for you. I have never tried these but it may be a inexpensive way of keeping your trailer.
...
Which prop are you running now??
I use ACME #1235 14.50x14.25---0.105 cup--4 blade--1 1/8"--LH
It does a great job!!!
Todd, yep these are from Boo. I have 100's more just haven't went through them all yet. You and Allison should come out next year if you can. FunTimes!!!!
82108211
Here are a few of mine.81948195819681978197
http://www.skidim.com/prodinfo.asp?number=SSI03-3109090
This is all I have seen.
If you are heading south Belews Lake Stokesdale,NC has a water temp of 78 today. It's a Duke Power Plant lake so it stays from the low 60's-high 70's all winter we go every weekend through the winter.
I already use the Comptech Release MUCH MUCH better than the Bullet!! Manual and Automatic release.
http://skyski.com/store/comptech-safety-trick-release.html
Some guys out at Canyon Lake are riding with them I hear. I don't like Hard carbon handles myself. But I ordered one to see what it was like. If I don't like it I'll just add it to the collection in...
Yep I have taken my tank out. Because the the floor was put down and the tank was pinched and started leaking fuel at 100+/- hours. The tank is easy to pull. It would be worth taking a look.