Search:

I have a 92 Comp TS6M and was thinking of doing the same. Have you checked the length of the pump to see if you will have enough clearance to remove and install the impeller when your done? My...

I just crossed the scales today and I was 3180 lbs so I feel pretty good about that. I have an original single axle trailer and it will be spring before I get the boat off the trailer to weigh it...

Another moisture / rot question ? I read about all these Supra owners who have replaced the floor and stringers resulting in quite a drop in hull weight, back to their original weight and they...

I did call Skidim.com and they were awesome to work with. The reason I was asking what size Hugh was told to use was I originally saw where a guy used 2 wraps of 5/16 flax style packing so that is...

Hugh,
I'm curious what size packing you put in and how many wraps?
Thanks
Dave

Thanks Michael

Michael, do you happen to know what size packing fits a 1992 supra comp "rudder box" ? I've been searching all over and can't find out what size it takes. I put in 2 layers of 5/16 today and it...

I checked the rudder while it was on the lift today. There is slop side to side and front to back so I will try to repair it at my next chance.
Do you happen to know if a 92 Supra would be a cord...

My 92 Supra Comp steering is very stiff while underway. On the lift, or at idle in gear it is ok, but once underway, it is a two hand effort to make turns?
I have had Centurion's, Malibu's,...

I have a Protec distributor and the coil pack off a 92 supra 5.8 carbureted engine with 420 hours. I converted to the DUI ignition and hate to throw this stuff away since the coil pack is no longer...

I'm on the west coast in Washington state. Summers are short here so I didn't want to chance the old protech ignition going bad on a nice weekend.

Michael, thanks for your help with the firing order spec page. I just pulled the boat out of winter storage and removed the Pro-Tech ignition in favor of a DUI distributor. I am not a mechanic by...

Yes, that confirms what I thought. The PLD in the model was a left rotation ( looking at the flywheel), and the lower HP 351 engine. The mislabeled firing order on the tag ( had (2) #1 cyl and (2)...

Thanks for the heads up! I did translate the tag to a left hand rotation ( I believe is standard) lower HP 351 with PCM 1.23 to 1 drive and a right hand prop. I think that would be the...

Did you convert it to a DUI distributor ?

Can you tell what rotation that is (right /left > which is standard?) 1-3-7-2-6-5-4-8 must be the other rotation firing order?
I have not been able to upload the picture of the tag yet?
Thanks...

I picked up a 92 Supra ts6m and want to change out the protech ignition with a DUI system.
I took a picture of the engine tag so that I would get the correct kit before I put it away and noticed the...