Search:

Got an answer from Roger at Skiers Choice. Part number for current gauge that replaces the old one has a part number 105495. You will also need a new wire pigtail since the new gauge does not have...

My 2003 Supra Launch SSV wake plate gauge has starting working intermittently. I have narrowed it down to the wires coming out of the black box under the dash that go over to the gauge. The part...

Just noticed when I was working on the boat last night that my speedo gauge light comes on when the key is turned on. So it is always on if the key is turned in the boat. All the rest of the gauge...

Did you ever sell these?

Our lake in Orange Springs close to Ocala has dropped tremendously since last summer and is now unusable. Looks like we will be hitting the river this year unless we get some rain or hurricanes.

Here is a picture. Only the launch ssv is raised.

9754

My letters are raised on mine. I can send you a picture if that would help.

Not sure if you are aware of the problem with water being below the ski locker or not? I have this problem on my 2003 ssv. Not sure where you are located but if you are up north could the water...

Same problem on my 2003 Supra Launch SSV. I cut a hole in the floor and removed the foam and shop vac it out. I put an access port in the hole so I can remove it, shop vac it out, and leave it open...

It all started towards the end of April when I put my boat in the water for the first time this summer. My boat is a 2003 supra launch ssv with the inmar 325 assault TBI engine. I checked the oil...

My FAE on my 2003 ssv kept coming off and Larry corrected the problem. The center piece of the FAE that goes straight down was not the correct length. It was too long so he sent me the correct size...

Well after doing testing adn narrowing it down they came to the conclusion that the head gasket needed to be replaced. While doing this they visually inspected the head on the starboard side of the...

On my boat it only had a petcock on 1 side and the knock sensor on the other. I remove the knock sensor completely. I have also removed the petcock and replaced with a solid plug so I do take it...

I did winterize my engine. I drained the block, drained the manifolds, the exhaust and the intake and removed the impeller. I sprayed fogger in the engine and also removed the spark plugs and...

I have heard that if you use a stainless prop on these boats you take more of a chance messing something up with your shaft or trans because the stainless prop does not give. I myself would rather...

Thanks. I spoke with Boat US this morning and I do have the ice and freeze protection. Im glad they took care of me and put this on my policy. They said once the dealer determines what it is all...

Well i had some bad luck this weekend. A couple weeks ago I changed all of my fluids in my supra. After changing the fluids I ran the boat on the hose and rechecked the oil and everything looked...

JT from Nettleprops.com has agreed to do a group buy for the skiers choice moomba/supra forum members. This will include acme and oj props and also pullers. He has asked that we keep this to the...

My 2003 ssv is prewired with the switch but does not have the heater. I think it was just a standard wire harness and switch plate so that is why it is there.

Thanks

I am going to swap my setup some. I have the 750's in each rear locker and then the stock 600 center bag. I use the old stock 400's that came with the boat. I usually fill the center and...

Scott

How are you waiting your boat? I have the exact same hull and I cant get my wake that nice.

I have a 2003 ssv and te wake was not to bad with the stock ballast. I switched out the back sacs for the 750lb fly high sacs and it made a big difference.

Why are you redoing the floor? Shouldnt a 99 be all fiberglass and no wood.

On my 03 ssv it comes off teh bottom of the pan and over to the starboard side. Take the side panel off so you can get a good view under the engine.

We are not posting the discount and promo code at wakemakers.com request. Contact jason at [email protected]. It is worth your time.