Neutral safety switch or starter solenoid on the back of the block
Type: Posts; User: Thor
Neutral safety switch or starter solenoid on the back of the block
I was curious if anyone had suggestion on a brand and length for a new winch strap I can install on the trailer for my 92 Supra?
1. Prop- either repair or buy new. Repairs like that are usually under 100
2. Do the fiberglass repair.
3. No, it’s not normal. You can order a new one online and install.
Thanks for the info. It worked like a charm!
Hey,
I read through when you posted them. It was pretty cool seeing the old brochures. I can PM the hull numbers but I already ran it through the dealer and Skiers choice. Both came back with a 92...
Last 2 are 92. It’s kind of an odd boat. It’s the hull and interior design of a Conbrio but also has some interior design from another model. I reached out to skiers choice about 2 years ago to...
I have a 92 Supra with the square looking windows. The frame seems to have a little bit of play. What is the process for locating the screws or fasteners to tighten them?
To be safe, check your compression on all cylinders.
I am interested. Please send pictures
I have 2 monster tower ski racks for sale on FB. Located in Indiana
Take a look at gatorstep also.
Agree with the above. Also consider the starter solenoid on the back of the block
I don’t recommend you run the boat like this. But to see if it’s the safety switch, put both wires together on the...
Just need to clean the pads and project done!
19113
19112
Runners seated and several coats of fiberglass added
19096
19097
Runners cut and thread inserts added
19087
I’m interested but I need to wait to get my boat at the end of the month to verify it will fit.
Sanded out the bad fiber glass.
Put down a base coat of resin.
Sanded the bottom.
Put peanut butter around the sides to level everything out.
Re-formed the corners.
Sanded it all again.
Put...
Does anyone know what the grey silicone like coating is that Supra used on the bottom of these decks?
I was wondering if anyone has a recemondation for a mildew spray that can be used for carpets in compartments? The cubby that I place the life vests in seems to stay damp, even when left open for...
Well, bad news. The further I clean this old, fiberglass out I’m finding dead spots.. I’m hoping by today the sanding portion will be done and I can move onto Fiberglass layering tomorrow.
19031
I can provide more info for you to contact the seller, if interested.
I sanded down the fiber glass, added another layer of resin, sanded, cleaned and painted the muffler.
>Project done
19030
More resin was added to the inside. The lid has been cleaned and fitted. Entire outside was sanded and cleaned. Peanut butter packed into gaps and several layers of fiberglass resin and sheet added. ...
Fiber glass resin was added with fiberglass sheets. The area was sanded and cleaned
19022
19023
19024
The center port was seated back into place with peanut butter between mating surfaces,...
At the end of last season, I started to hear a rattle noise in the back of the engine compartment. Automatically, I was worried of a transmission problem. It turned out, the muffler had a rattle...