Search:

FYI. Repaired/Welded bracket. The bend was slightly off so it was necessary to use hard plastic cutting board as a thick gasket. I think this will help keep the new steel from always resting in...

That's what I figured. Thanks.

Thanks for inputs above. I got it figured out already. Here are a few pics. Yes, without a little courage, critical analysis, some input from other Supra owners ... and a little luck ... this at...

------------------------------------------------------

(Ref: 1991 Supra Comp TS6M, 1330 hrs., year-round use, never winterized, etc., etc.)


I guess I have to answer my own questions, but in...

I know this is an old posting but I have a '91 TS6M with the rusty pylon bracket issue that has been slowly developing over the years. It has recently developed a little looseness or minor movement...

Yes, cutting is the trick to get started on this project. I posted my own step by step process with some pics but I didn't see it posted. Maybe I hit cancel instead of post. The key part of what I...

Thanks for everyone's input. I found it much less work to remove the riser. Like everyone pointed out they are pretty much "welded" in place after several years, or so they seem. After trying to...

... MUST remove the riser otherwise you'll never get those hoses back on. My problem was NOT the hose but a stress fracture in the muffler right at the top of the exhaust hose which caused a leak...

Just a quick reply but yes, I did get rid of it last year. Reportedly it was a bad coil pack inside the unit and to tear it apart requires the expertise of an electronic tech at a workbench. These...

Good question. Anyone out there know the answer? I guess it's time to go to www.SkiDim.com and ask them what they think. There's eventually got to be a way to upgrade/update. The Big T steering...

Thanks for the additional feedback. I started to remove the riser but like I said it wouldn't budge so I just cleaned the bolts and re-torqued them. I don't know what the torque spec is though. ...

Thanks for the tips and suggestions. I did suspect that I'd have to cut them off. I tried to remove the riser but it wouldn't budge. I don't want to get out the big hammer just yet so I'm just going...

Thanks for the suggestions. I think you included pics on another post of your Supra and mine looks exactly like your exhaust setup. My initial investigation did make this look like a PITA which is...

What is the best way to remove the wet exhaust hoses on a 1991 Supra Comp TS6M? I have one on the left side outlet of the Silent Rider muffler that is starting to leak and it appears it's virtually...

Is there a replacement muffler being made by anyone? I found the web site for Marine Muffler Corp.

www.marinemuffler.com which links to:

www.centekindustries.com

They were the original...