Search:

You can contact Vince @ Discount Inboard Marine, www.skidim.com or 803.345.0996. He will be able to hook you up with an owners manual and any other parts info. for that motor. Brian Raymond

Congrats on the new ride and welcome to the board. Anthony Cooper at Skiers Choice is the "Parts and information Guru" on the older boats. He is deffinately a great resource and has access to older...

The Indmar impeller part # is 685007 and the gasket is 685008. Brian Raymond

Anthony Cooper is the all knowing parts "GURU" @ Skiers Choice. He will be able to assist you if this part is available,or, have contact info. on where to get it. You can contact him:...

I have found the 3M spray adhesive to be a very good contender in securing marine carpet. It is about $8/can, but worth it, and can be purchased at Home Depot or Lowes. Brian Raymond

You can also mount it 6-8" off of the centerline between the starter and the starboard transmission mount. This is a non-disruptive area and is serviceable w/out removing seats and floorboards....

I will be more than happy to assist any way I can. Please feel free to email me; [email protected] I have many diagrams (some hand drawn so be easy on me), that I can email and fax. Please...

All Supras went to full fiberglass construction, floors, stringers etc. in 1992. Hope this helps, keep us posted. Brian Raymond

I would deffinately make sure all the cable connections are clean and tight. Make sure there is a good ground base between the 3 prong solenoid on the stbd. rear of the motor and the head. With the...

I apologize for the delayed response. Here are the updates in regards to the 2009 Supra Owners Manuals. Due to the late reception of the Owners Manuals, any boats shipped before October 5th, were...

The in-line filter has a 1/2" inlet and outlet. The CarQuest part # is 86299, this can be cross referenced to any compatible brand. Napa does carry this type of filter. Hope this helps, keep us...

Great advice from Engine Nut. This is the most important tranny service to have done. It is best to have it done by a certified dealer. Brian Raymond

Sorry to hear about the light. I would deffinately take it in to be looked at. It may be a glitch that set the light off, but better safe than sorry. Your dealer has the Diacom set-up to properly...

Jim, hope all is well. It is a left hand rotation motor. There should be a metal tag on the intake manifold with the engine serial number (starting with a plp or php). You can jot this number down...

Donnie is a great guy and I think is the most honest and most detail oriented boat repairman in the industry. I had the opportunity to work with him for years, and I have learned alot from him. He...

Awesome job on the refurb. The boat looks great, you should be proud. That was killer documentation and pix of the refurb. Anybody ou there doing winter refurbs.- you know who to go to. Congrats on a...

The dealer can have it drop shipped to you. If that is not an option, contact the parts "GURU" Anthony Cooper at Skiers Choice (865)983.9924ext.118. Brian Raymond

IF YOU HAVE THE BENNETT GAUGE INSTALLED (READ IN %), IT WILL ONLY READ ABOUT 50% IN THE DOWN POS. AND SHOULD READ 0% IN THE UP POS. THIS IS BECAUSE THERE ARE SHORTER THROW STANSIONS ON THE SUPRAS...

DZ, hope all is well. Check with your local dealer for o.e.m. part # and pricing, it will be a custom fit and they can drop ship it. If this is not an option, take your boat to a local canvas shop,...

Great advice about cleaning the threads with a tap. To help ease the situation, when re-installing the block plugs, use a teflon sealant to help protect the threads when they are removed again. Brian...

I believe the turn-buckle style plate adj. and mounting hardware are still available. Contact the parts "GURU" Anthony Cooper; 865.983.9924ext.118 or [email protected] Hope this helps, keep...

I was working hard, I went to go get a lemonade (from all the hard work), and the ladies came down for a photo. They agreed to chop me in the middle if I would quit whinning. The event went Awesome,...

I would start off with doing a motor alignment, just to take it out of the equasion. You can contact; [email protected], and they can email you this procedure. Brian Raymond

The four color pinstripe is still available, check with your dealer for pricing. Be sure to know the stripe width size, this measurement is taken from the top of the yellow to the bottom of the blue....

I am sorry to hear about your loss. Your dealer should have all that info., check with them for model and part numbers, and for pricing. You can also contact; [email protected] for...