Hey guys. Here is one of the last update of the season, as the boat is now on the trailer, ready for winterizing.
So, as I post before, I find the new steering wheel too close to the dash. So I decided to built a freebie hub rizer. Here is how I proceed : I asked to my metal partner company to give me 20 pieces of 2mm thickness aluminium washer. As you can see, finition was average, because they use a punching machine.
I then glued all those washer together with cyanoacrylate glue.
Then I screwed it to get a solid piece and I started to hand file it. Then I polished it with the same tools I used for the TSB face and the seat feet.
Here are photos :