I need to do some work on the rudder of my 90 bravura.
I cant for life of me get the fuel tank out it's empty and lose just will not turn to come all the way out.
Is the somthing am missing.
Thanks john
I need to do some work on the rudder of my 90 bravura.
I cant for life of me get the fuel tank out it's empty and lose just will not turn to come all the way out.
Is the somthing am missing.
Thanks john
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
The tank sits on some foam type of material. Over the years it may have semi-melted from the heat and essentially glued the tank to the floor. Once your connections (vent, fill, fuel line, etc) are removed, and the straps are removed, then tank should come right out. See if you can tell if the foam is causing you problems.
She was basicaly glued in. I got that loose all the lines and sender wires are off.
I can lift the tank up to lip where the trunk sets. Its just will not fit through the hole and no enough room to
turn it up on end edge so it will come out.
Sorry I didnt explane my problem better thanks for your time.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
Oh, sorry about that. I'm not familiar with the specific interior layout of the Bravura. I would have thought it was similar to the Saltare in that you simply remove the ski locker and lift the tank out.
I wish
Its just my luck to stumble in to an odd ball.
I think I have come up with a new plan. Will haft to waight till tomorro.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
tank on my saltare was very tight.
slide tank to one side of boat as far as you can...i think the filler side. lift the opposite end up and start working it around. you'll find the magic angle.
Don't know about the Bravura but on my 89 Salt I had to slide the tank forward to remove it. The back corners of the top cap inner skirt liner had been notched just in front of the tank where they meet the floor for clearance.
_______________89 Saltare Resto Project___________
_________Then________________________Now_____
Hmmm. On my '90 sunsport I removed the rear bench also. Super quick and easy and made it MUCH easier to get out.
I was finaly able to get it out.
The tank turns up on its side to come out only problem there is no enough room to flip it till you take off part of the blower system.
2012-02-28 16.26.22.jpg
Now on to the rudder
How much slop are these things suppost to have. I belive mine is the rope packing style.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape