Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default 2-Part Question??

    1st question is I will need 3-amp kits for wiring them up. Wheres a good place to get these??
    2-JL's and a PPI.

    Im still a little confused on the whole WHO has a transom remote and will it work with any head unit. Heres what I want to do. I have a new JVC head unit but will sell it to buy another that will work with a transom remote. Which ones?? I will be also installing a Krypt/4200. Any ideas?? Thanks for your help. Jet
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  2. #2
    Join Date
    May 2010
    Location
    Dixon, IL and Columbia, MO
    Posts
    775

    Default

    I can't believe KG and Dusty have gone almost an hour without jumping all over these questions for you. They must be off to lunch : )

  3. #3
    Join Date
    Oct 2010
    Posts
    16

    Default

    I wouldn't use an amp kit get just buy some power wire. darvex.com has good prices on power and ground wire by the foot. Using a distribution block will clean up the wiring a ton. Here's how you could do it. The only thing I am unsure of is where you should put your fuse or if you should use a fused distribution block. I've been getting real creative with paint diagrams lately


  4. #4
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    1,033

    Default

    They make distribution blocks that are fused and do both power and ground.

    Dusty should be able to drop his wiring diagram on here from when we did it. I did a quick scan on Moomba and did not spot it.
    2006 Supra 24SSV

  5. #5
    Join Date
    May 2010
    Location
    Dixon, IL and Columbia, MO
    Posts
    775

    Default

    I'm interested to see Dusty's diagram then, I'm planning on going to a dual battery set up once I get the boat out of storage and start tackling projects and most of this stuff is over my head...
    Last edited by chrisk; 03-06-2012 at 03:32 PM. Reason: typo

  6. #6
    Join Date
    Jan 2010
    Location
    North Texas
    Posts
    743

    Default

    Lemme find it. Jet, you know how to find me bud.
    2006 Supra 20 - Sold
    2006 Supra 24 Gravity Games - Sold
    2015 Supra SE450 - Sold

  7. #7
    Join Date
    Jan 2010
    Location
    North Texas
    Posts
    743

    Default

    Here is the best I an do. Hopefully it will help. For the record, obv. there are all kinds of ways to do it, but this was my route. Tons has changed since the entire system was redone, but this is how it was all based.

    Dual JL amps plus 4 channel


    2 Stereo Batt and one crank bat setup (I have 4 total now)


    How the dual hybrid is wired now


    Any of that help you out?
    2006 Supra 20 - Sold
    2006 Supra 24 Gravity Games - Sold
    2015 Supra SE450 - Sold

  8. #8
    Join Date
    Mar 2010
    Location
    Arkansas
    Posts
    1,033

    Default

    BAM
    2006 Supra 24SSV

  9. #9
    Join Date
    May 2010
    Location
    Dixon, IL and Columbia, MO
    Posts
    775

    Default

    What KG said, BAM. Great stuff, getting so excited to start tearing things apart.

    I'm going to keep grilling you about this and hijacking Jet's thread - I'm interested in cost. I'm looking to move to a dual battery setup. I will want one battery to power my two amps - one of which powers 6 speakers, and the other powers the sub. From looking at the picture above I should get a distribution block, the VSR, possibly the dual charger and BEP switch? Not really sure what those last two are for. Just by glancing at that what would a rough estimate on cost be?

  10. #10
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default

    Its a little vauge?? Can you go over that again? LOL. No thats great info there but it dosn't hit my question about the wired transom remotes and head units??
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •