Results 1 to 7 of 7
  1. #1

    Default 86 sunsport rear back bench

    Ok so my boat the bench has no storage and behind the bench there is a small storage up top that is connected to the cap, my question is what all diff options did the rear of this boat have, it seems a lot have storage under the seat but can't tell about the storage up top. I'm redoing all my seats and plan to put storage under the seat for a fat sac but also thinking about cutting into the cap and making a whole new bench and storage area on top of the gas tank... Any thoughts info or ideas?

  2. #2
    Join Date
    Apr 2009
    Posts
    103

    Default

    I thought most had a swim locker up top? Here is what I did under the seat for heater and storage... IMAG1078.jpg
    There should be plenty of room for a seat sack under there I would think. maybe this one... http://www.wakemakers.com/fly-high-rear-seat-sac.html
    Some pictures of what you're talking about would help out, but Good luck.
    1990 Supra SunSport... Perpetual Restoration
    https://forum.supraboats.com/album.php?albumid=136

    1986 Supra Saltare... For Sale
    https://forum.supraboats.com/album.php?albumid=307

    1982 Mastercraft Stars & Stripes... Sold For My 1st Supra!
    https://forum.supraboats.com/album.php?albumid=135

  3. #3

    Default

    ok like i said there is just ply wood under my cushions no storage, and in your pic there is nothing above your gas tank but in my pic there is



  4. #4
    Join Date
    Sep 2011
    Location
    GA
    Posts
    345

    Default

    sitdown, is that your rudder arm/steering in the picture? If not what is that? I only ask cause I have never had that open in my boat. Thanks

  5. #5

    Default

    Yes it is, I can get you a better picture if you want

  6. #6
    Join Date
    Mar 2012
    Location
    Houston, TX
    Posts
    109

    Default

    Looks like you are wondering the same thing I am. Mine is like that also but my seats had enough room to hide like life jackets under it. I am looking at trying to make that storage box removable to get back there withouth slide my tank out.

  7. #7
    Join Date
    Sep 2011
    Location
    GA
    Posts
    345

    Default

    Sitdown, if you dont mind that would be perfect if you can get a better picture. My floors and stringers were done prior to me getting the boat, the owner didn't put an access cutout for the arm. It seems a little lose, so I was going to cut one in this weekend, and this gives me a better idea of where/how to do it. Thanks, and sorry I didn't mean to hi-jack your thread. This is going to help me better place the panel almost directly on top of the rudder/arm.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •