So you're basically cutting into the gel coat with the aggressive grits and then polishing out from there with the less aggressive? You're not going to be applying more gel?
So you're basically cutting into the gel coat with the aggressive grits and then polishing out from there with the less aggressive? You're not going to be applying more gel?
Yup.No to adding gel. Was told I didn't need to... although I have to fix a few spots that were covered by the decals. When all said and done will have taken off less than a mm and hopefully will never have to go to this extreme again.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
From the factory how is the gel coat applied??? Is it sprayed if so can you respray it..... Perhaps an automotive clear is not the way if you can re apply the gel/shine.
2003 Supra Launch " Gravity Games Edition"
Dodge ram CTD tow vehicles....
Turns out 320 on a da with a bit of work will bring down.
Takes a bit of time 3hours in I have almost half of one side done.
Did you do the top of the gunals to.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
not yet.... just below the rubrail so far.... I don't think I'll have be so aggressive on the top. was going to start with 600.
Im glad mine is white exept the sides.
After this little venture im not messing with any thing else.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
Progress....
2003 Supra Launch " Gravity Games Edition"
Dodge ram CTD tow vehicles....
I hope he hasnt killed himself trying to get it done.
I can bearly lift my arms and my ride still looks like crap.
90 bravura 351 1.23/1pmc40 Pefectpass stargazer wake
You only need two tools wd-40 and duck tape
If it should move and doesn't wd40
If it moves and shouldent duck tape
Planning on doing some work on her today.... took off all the stuff on the rear yesterday.
I had to work too..... and lets not forget the bunch kids I have. lol