perfect pass woo's

[ronixrider82]

OK my linkage test failed on my pp but when I look at it.. I think the brass looking thing is snapped off making the cable tilt LOL I know its hard to explain so I took a pic hoping I won't have to pay 89 bucks for them to tell me yup thats it.


2012-04-07 17.13.50.jpg

[86 century]

Cant tell from the pic what you are talking about.

Is the brass L shaped part still hooked to the carb/throttlebody.
Does the servo still do the auto tighten thing when you power it up.

Does the carb linkage still move when you advance the helm control.
This is what mine looks like hope it helps

[lively]

looks like you snapped it off right at the threads ... they make ALLTHREAD in many different sizes and could be a good easy fix for under 30.00 or over ... post more detail pics of the area and what happened

[ronixrider82]

I dont have any more pics at this time because the boat is kept at the lake but I circled the part that is detached and I can move it freeley. I am thinking that its not suppose to do that2012-04-07 17.13.50.jpg... Can someone tell me what this part is?

[lively]

idk what you have but does it have a cable that runs through it ? this looks like a cable tensioner to me

[86 century]

It could be as simple as the servo is not doing its thing.

The part you have circled is where the pp cable conects to your throttle cable.

It looks like the servo did not pull the slack out. I dont think the cable is broken.


Next time you get to you boat run the system test that will tell you if the servo is dead.