Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2010
    Location
    Fort Worth Tx
    Posts
    26

    Default Lost Engine ecu flashing (lost all dash gauges)?

    Have 2007 22ssv, ran boat 4+ hrs and all digital and manual gauges quit. The main
    screen flashes- ENG ECU NO DATA Over 25 Seconds- boat runs fine. Any ideas or anyone else have this happen? Days like this make me miss my 90 sunsport!

  2. #2
    Join Date
    Aug 2009
    Location
    London, Ontario, Canada
    Posts
    1,187

    Default

    I would check your wiring harness at engine and connections under dash. If your engine is running fine , the data coming from the engine ecm is not getting to your boats ecu under the helm. could be a lost ground. check your manual and all fuses and breakers
    2009 21v Worlds 340 Cat
    run your engine after you change the oil
    Doug

  3. #3
    Join Date
    Aug 2010
    Location
    Fort Worth Tx
    Posts
    26

    Default

    Thanks, will start crawling around lookin for the problem, w/a cold one.

  4. #4
    Join Date
    Oct 2012
    Location
    Apex, NC
    Posts
    170

    Default

    @Brysteele - i just had this happen this past weekend trying to pass two boats surfing when their two waves merged and created a monster, my boat had a direct hit. The hull was fine, nothing damaged but the error code flashed on the dashboard. Did you correct your issue - was it at the engine or under the dash?

    Thanks for the info - JY

    John Young, Supra Launch 21V
    Apex, NC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •