Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2012
    Posts
    11

    Default How are inboat speakers wired from factory?

    Out of curiosity - how are the inboat speakers (2 bow & 4 cabin) wired from factory - I'd imagine most recent years would be similar '05+.
    Are they separated into only 2 channels L+R or 6 channels?

  2. #2
    Join Date
    Mar 2012
    Location
    Clermont, Fl (The wakeboarding capital of the world)
    Posts
    79

    Default

    my stock 2009 kicker speakers were wired to the stock kicker amp like this:



    amp: >>wire ID

    port bow to lspkr >>(factory wire tag reads: "Left Front")

    starboard bow to rspkr >>("Right Front")

    2 port cabins to lspkr >>("Left)

    2 starboard cabins to rspkr. >>("Right")
    Last edited by Geary101; 06-11-2012 at 12:18 PM.

  3. #3
    Join Date
    Apr 2006
    Location
    Lawrenceville, GA
    Posts
    112

    Default

    OneMoreSet...to answer your question in on word on how the factory speakers are wired from the factory. "WRONG" I have a 2006 21V that had constant problems with the head unit shutting down on higher volumes. The cabin speakers a wired incorrectly. Here's the thread that addressed the issue for me and solved my problem. A little less volume from the cabin speakers, but I can now crank the HU up to 30-32 with no problem!

    https://forum.supraboats.com/showthr...2670#post22670

    I was a slow learner so read through the entire thread. Hope this helps.

    Scott
    2006 Supra Launch 21V

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •