%#$& won't come off. Any tips?? The puller just keep co.ing off. I'm not sure if it's on that hard or its just slipping off. I sprayed it several times last week and nothing!
%#$& won't come off. Any tips?? The puller just keep co.ing off. I'm not sure if it's on that hard or its just slipping off. I sprayed it several times last week and nothing!
89' Comp rebuild thread:
https://www.facebook.com/andrewjetm/...1923456&type=3
89' Comp Mod's and fun pic's:
https://www.facebook.com/andrewjetm/...6666464&type=3
89' Supra/Custom Tower & Interior/Swivel Racks
4 Blade-14X14/1600 lbs Ballast
Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub
Have you tried any penetrating fluid behind it? Liquid wrench? Not WD-40, that's not as good.
Mine came off pretty easy so I'm not much help there.
Maybe VERY LIGHT touch with an air hammer? Alot of times all they need is a little vibe....
-Rich
1990 Supra Mariah/351 PCM 1:23-1 PCM
Jet when you get this sorted, tell me how!! I've soaked mine and she won't budge, I've tried 4 pullers......arghhhhh
90 Conbrio
Try some heat on it. Use a heat gun, not a torch. It's like a hair dryer on steroids.
Ah, I have a heat gun. i will try that and let yall know.
89' Comp rebuild thread:
https://www.facebook.com/andrewjetm/...1923456&type=3
89' Comp Mod's and fun pic's:
https://www.facebook.com/andrewjetm/...6666464&type=3
89' Supra/Custom Tower & Interior/Swivel Racks
4 Blade-14X14/1600 lbs Ballast
Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub
did ya get'r off???? boy that sounded good! lol
90 Conbrio
No still working on the stupid stereo. lol
89' Comp rebuild thread:
https://www.facebook.com/andrewjetm/...1923456&type=3
89' Comp Mod's and fun pic's:
https://www.facebook.com/andrewjetm/...6666464&type=3
89' Supra/Custom Tower & Interior/Swivel Racks
4 Blade-14X14/1600 lbs Ballast
Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub
Mine was tough too. It took a puller, a little heat, and a bump with a hammer.