Stereo overhaul part 2

[pctarmor]

I have most of the new gear on hand, a big box of fun from Wet Sounds showed up today. The box I ordered was damaged upon delivery and a new one is on the way. If I can get my travel figured out for work I should be able to get to installing this weekend. I still have to finish up mounting stuff to the amp rack and get the wiring prepared.
Final system:
Head unit: Kenwood KMR-700U w/ 2 remotes
Interior speakers: 6 Wet Sounds XS 650s
Tower speakers: 2 REV 10s
Sub: Wet Sounds XS-12
Amps: 2 Wet Sounds SYN 4s, one HT1
Wiring from Wylietunes!

This is easily the most involved stereo install I've ever done and I have to admit I'm a little nervous about all of the electrical work I've done to get to this point. I had to remount the ciruit breakers upside down under the dash to get the box to fit where I want and I'm basically overhauling the battery set ups. I'm crossing my fingers that everything still works once I'm done.
Thanks for everyone's help so far!


new gear.jpg

[pap]

That looks like a schweeeet setup. Please take pics as you install and let us see how you do! Do you have your sub box built already?

[PATROLW871]

Sounds like fun.... I did mine all up last year...4 rev10s on the tower and 8 wet sounds 650s, and 4 Rockford p3...ws420 controller and 4 alpine amps... It sound awesome... Wet sounds are the way to go...

Good luck. And have fun...

[Wylietunes]

Any new pics? Hows it going?

[pctarmor]

Work has been killer lately. I am devoting all of Saturday to getting the project moving! Pics to come soon....

[pctarmor]

I have all the speakers mounted and wire pulled. Next step is hooking up the amps. Quick question for you guys, what would you set the crossovers for on the amps for the tower speakers and the cabin speakers. For reference I'm using one SYN4 for the REV10s and 1 for the 6 WS650s.