Page 1 of 4 123 ... LastLast
Results 1 to 10 of 35
  1. #1
    Join Date
    Sep 2009
    Location
    Indiana
    Posts
    152

    Default Hydraulic/ Electric Wake plate upgrade

    Hi as the weather turns colder and it becomes apparent that there will not be too many more days on the water this year, I start to think about projects for the off season.

    My main goal for the boat this winter is to convert the manual wake plate to a powered wake plate. I really like the idea of the Lenco electric actuators but know that the bennet hydraulic are the tried and true.

    If you have upgraded I would like to see/ hear how you did it and what you used. I would also appreciate some pictures of the newer boats factory setup if possible.

    Thanks
    Derrick
    1988 Supra Mariah

  2. #2
    96Comp Guest

    Default Actuators

    I will be doing the same thing to my Comp this winter. Decided to go hydraulic. While the Lencos may be easier to install, I read too many posts on line where the motors failed. Makes sense because the motor and all controls are in the actuator. If the seal fails, the unit fails. Bennett also has a specific replacement kit for bottom mount plates, like mine and I assume, yours. The entire Bennett kit is $500, plus another $120 if you want the indicator. I plan on taking out the interior for some repaint and repair work, so that should save a little on the install price.
    Attached Images Attached Images

  3. #3
    Join Date
    Sep 2009
    Location
    Indiana
    Posts
    152

    Default

    Where did you find the bennet kit?
    1988 Supra Mariah

  4. #4
    96Comp Guest

    Default Bennet Kit

    Saw one on their web site and then called and spoke to customer service. They will fabricate the hinge for bottom mount in stead of transom mount. The two actuators mount where the manual tab adjustments mount on the transom. However due to the length of the actuators, it appears I will not get as much up deflection as I wanted, as in position for a surf wake. Still better than manual adjustment.

  5. #5
    Join Date
    Feb 2009
    Location
    Minneapolis, MN
    Posts
    3,112

    Default

    Mine is a Bennett and I would highly recommend them as a brand choice. Their customer service is one of those 'WOW' experiences.
    --WakeMikeys 1987 Supra SunSport--
    Thread - https://forum.supraboats.com/showthread.php?t=3630
    Photo Gallery - http://photos.wakeboarder.com/showga.../35518/cat/500
    Videos - http://www.vimeo.com/user2034462/videos
    Follow me on Twitter @WakeMikey

  6. #6
    Join Date
    Sep 2009
    Location
    Indiana
    Posts
    152

    Default

    Mikey does yours use a single switch and do you have the indicators? If not do you wish you did have the indicators?
    1988 Supra Mariah

  7. #7
    Join Date
    Feb 2009
    Location
    Minneapolis, MN
    Posts
    3,112

    Default

    Single switch, no indicators. I can tell pretty easily by either driving and looking at the wake shape (set and forget for the session), or else the motor makes a different noise when high or low-point is reached. I have learned how many seconds that takes and can adjust accordingly.
    --WakeMikeys 1987 Supra SunSport--
    Thread - https://forum.supraboats.com/showthread.php?t=3630
    Photo Gallery - http://photos.wakeboarder.com/showga.../35518/cat/500
    Videos - http://www.vimeo.com/user2034462/videos
    Follow me on Twitter @WakeMikey

  8. #8
    Join Date
    Sep 2009
    Location
    Indiana
    Posts
    152

    Default

    Thanks for the info guys
    1988 Supra Mariah

  9. #9
    Join Date
    May 2009
    Location
    Back to Dallas!
    Posts
    1,845

    Default

    96 Comp..we need to see more pics of your boat..she looks sweeet! Jet
    89' Comp rebuild thread:
    https://www.facebook.com/andrewjetm/...1923456&type=3

    89' Comp Mod's and fun pic's:
    https://www.facebook.com/andrewjetm/...6666464&type=3

    89' Supra/Custom Tower & Interior/Swivel Racks
    4 Blade-14X14/1600 lbs Ballast
    Roswell Bar/Led's/Krypt 6.5 HLCD's/Krypt 4200 Eq
    JL-Kicker Amps 2000 Watts/Kicker Interiors/L7 Kicker Sub

  10. #10
    Join Date
    May 2010
    Location
    Dixon, IL and Columbia, MO
    Posts
    775

    Default Hydraulic Trim Tab

    Has anyone out there replaced the fixed trim plate with a hydraulic one? I'd really like to be able to control the trim a bit.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •