Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2010
    Location
    Feeding Hills, Massachusetts
    Posts
    113

    Default Adjustable wake plate

    I was thinking of an adjustable wake plate that can be controlled from inside the boat while the boat is moving, in the attached drawing the actuators could be electric or hydraulic, if the were hydraulic I could use an electrical driven hydrauli pump that is used for an outdrive and just get smaller hydraulic cylinders???





    WAKE PLATE.jpg

  2. #2
    Join Date
    Aug 2010
    Location
    Feeding Hills, Massachusetts
    Posts
    113

    Default

    I cant make the drawing larger??

  3. #3
    Join Date
    Oct 2012
    Location
    Anderson, SC
    Posts
    90

    Default

    I would only add one if you ski. I find that the wake plate on my boat always makes the wake smaller when down. But that's just my experience. It does help in choppy water but I always feel like I use more gas when cruising with it down as opposed to when it's up? Does that make any sense at all?

  4. #4
    Join Date
    Aug 2010
    Location
    Ma/Nh
    Posts
    126

    Default

    I used lenco electronic trim tab actuators to make my wake plate adjustable. Turns out all I ever really do is put it in the full-up position and leave it there.
    __________________
    87 Comp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •