I need an intact but dead ts6m to ressurrect on a brand new hull I picked up. Rotten stringers, dead motor, bad carpet and upholstery, its all good. Just need the price and location right.
Thanks
I need an intact but dead ts6m to ressurrect on a brand new hull I picked up. Rotten stringers, dead motor, bad carpet and upholstery, its all good. Just need the price and location right.
Thanks
Wait, you have just the lower hull? Stringers and floor? Or just the hull?
How did you get that?
I bought an unfinished hull thats been sitting in the back corner of an industrial shop for a couple of decades. Never built or sailed, it's either a supra or an exact copy. Complete joined top and bottom hull, stringers, foam and floor all in. Im looking for a deceased supra to resurrect. I dont want to trash a good boat, i need a truly dead ts6m.
you gotta have some pics...don't hold out on us!!
Last edited by Salty87; 04-19-2013 at 08:57 AM.
found this on ebay
http://cgi.ebay.com/ebaymotors/1986-...#ht_500wt_1182
Thanks HD thats exactly what I'm looking for, just closer to Canada. I was surprised when I was quoted 7000 on uship to drag a boat from Indiana to BC .
20130228_173659.jpg
Last edited by sjones14; 04-20-2013 at 12:58 AM.
there was once an outfit out of Langley that duplicated the hull of the old style comp (pre '92) and built a few boat around that same hull.
Is this one of their hulls?
20130228_173659.jpgI believe it is. It's an accurate copy but for the stringers around the motor mounts, which are slightly different.
Last edited by sjones14; 04-24-2013 at 03:41 PM.
I got an 88 that my son bought as a project and turned out to be my project. It's an 88. I put ne w stringers and foam but have not got the floor glassed in. The engine has been professionally rebuilt, interior re-upholstered, all new gauges and all parts to put it back together, including trailer with new tires. It was a complete boat before we tore it down. The boat is in Bay City MI. 48706. You can call me @ 989-820-7502 and I can send pics. $5000.00 firm. Thanks.....Mike