The cross members also get the fiberglass treatment before attaching.
DSC_0180.jpgDSC_0181.jpgDSC_0083.jpgDSC_0184.jpgDSC_0188.jpg
The cross members also get the fiberglass treatment before attaching.
DSC_0180.jpgDSC_0181.jpgDSC_0083.jpgDSC_0184.jpgDSC_0188.jpg
'89 Comp, Bought new...Still own.
Cross members are sanded and glassed into place using PL adhesive.
DSC_0189.jpgDSC_0192.jpgDSC_0193.jpgDSC_0194.jpgDSC_0195.jpg
'89 Comp, Bought new...Still own.
One of my modifications was to reinforce the driver seat area and eliminate the foot well. I also eliminated the 'doghouse' and moved the bilge pump forward to the lower area. I also decided to paint the hull with epoxy garage paint although I think I will not use the flakes on the next one.
DSC_0196.jpgDSC_0198.jpgDSC_0201.jpgDSC_0202.jpg
'89 Comp, Bought new...Still own.
I had to roll the boat out, lift the motor with the chain falls, then roll here back in, to get the motor in. It fit pretty well.
DSC_0209.jpgDSC_0216.jpgDSC_0219.jpg
'89 Comp, Bought new...Still own.
One of the sweet tips I learned from this forum was to use frezer bags and label everything. This really helped when putting her back together.The 3M 5200 is some good stuff.
DSC_0220.jpgDSC_0253.jpg
'89 Comp, Bought new...Still own.
Motor alignment was easier than I thought.
DSC_0261.jpgDSC_0258.jpgDSC_0257.jpg
'89 Comp, Bought new...Still own.
Why so many air pockets? Where ever the fiberglass is white, there is no epoxy... When doing glass work, always use more than enough.... Hope it holds strong
1992 Supra Comp Ts6m 5000 Series PCM 5.8 HO Pro Boss Protec Ignition (not converted) w/ 4010 "Fish Bowl" Carb
1.23:1 tranny
"Silent Rider. Quiets The Competition." muffler isn't so silent anymore. ITS HOLLOW!
1989 Correct Craft Martinique B/R PCM 5.8 Power Plus Package
1984 E-Scow
^ now why you wanna go crash on this guys build like that . I mean are you a union fiberglass man ? It looks good and will deff hold stronger than mine but then again I just painted poly everywhere anyways
Sent from my iPhone using Tapatalk
LIFE IS TOO SHORT NOT TO BE LIVELY
You are really making me look bad I started months before you and am still barely half way done.
Great work I will incorporate some of your Ideas into my build. Why the PL adhesive I was going to use epoxy?
That's a clean job you have done! That pl adhesive is a mess I used it on mine but not sure I would use it again