Page 1 of 2 12 LastLast
Results 1 to 10 of 24

Hybrid View

  1. #1
    Join Date
    Aug 2014
    Location
    Huntsville, AL
    Posts
    56

    Default 1996 La Brisa purchase

    Looking at a 1996 Supra La Brisa. It's got roughly 300 hrs, PCM 5.8 HO. Looks like original Supra branded single axle trailer. Everything I've read on this forum says it's a great engine - decent boat just not a popular Supra model. I'm looking for a good all around boat, I have no specific expectations as this would be my first boat, but I'm sure we will want to tube, ski, and try wakeboard/wakesurf with it on a very calm lake. He says it has no ballast. He's asking 8k OBO - the boat appears to be in good condition except the vinyl on the seats is worn and torn as expected. I understand this year and model should have no wood - all composite so I shouldn't have to worry about rot. Sounds like the glass may be problematic but that seems to be a small issue.

    Sound like a decent deal? For good measure, I'm going to have someone look over the boat and motor, and I'm going to have him take us out on the water. Any specifics I should be looking for would be appreciated.

    Pics: https://drive.google.com/folderview?...TQ&usp=sharing
    Last edited by PBWolf; 08-15-2014 at 10:08 PM.

  2. #2
    Join Date
    Jul 2014
    Location
    Portland, OR
    Posts
    32

    Default

    I just purchased a 95 La Brisa. I have been super happy with it so far. I have the same motor setup you do exactly, and again, I'm very happy with the way it runs. $8k seems like a good deal to me! I'm no expert on these boats yet, but hopefully between us owners on here, we can put a pretty good database together of La Brisa specific topics.

  3. #3
    Join Date
    Aug 2010
    Location
    Oyama, B C , Canada
    Posts
    650

    Default

    Always do a compression test on the engine.
    This model has a great ski wake but questionable for wake boarding.
    The engine itself is a great motor.
    Good luck

  4. #4
    Join Date
    Aug 2014
    Location
    Huntsville, AL
    Posts
    56

    Default

    Thanks, yeah - I've got someone lined up to do a full inspection of the boat - I'll make sure compression test is a part of that. Forgot to mention he said it has new carpet, so that's a plus. I added a couple more non B&W pictures from the craigslist ad to that link above.

  5. #5
    Join Date
    Jun 2013
    Location
    Syracuse NY
    Posts
    934

    Talking

    8k is a good deal. I paid a little more for mine with more hours. Only difference is I have the pro boss gt 40 motor. It will throw a good wake for boarding if you play with the wake plate. I have mine set where it's good at slower speeds and flattens out for skiing. You're going to love it. Great solid boat that handles just as good as a comp with the added room. Enjoy and if you have any questions feel free to ask. Our labrisa family is growing.

    1995 supra labrisa
    Pro boss gt40
    GPS Ridesteady
    Pioneer headunit kicker speakers

  6. #6
    Join Date
    Aug 2014
    Location
    Huntsville, AL
    Posts
    56

    Default

    How does one adjust the wake plate on this boat? From the pictures I've seen its screwed directly in to the bottom of the boat, or am I missing something?

  7. #7
    Join Date
    Aug 2010
    Location
    Oyama, B C , Canada
    Posts
    650

    Default

    There should be two metal "arms" that are attached to the base of the plate and come up at approx 45 degrees to back of plate.
    On these arms you will see it is threaded and there should be threaded adjustment pieces on each arm.
    Turn these to raise or lower the plane of the lower horizontal plate.

  8. #8
    Join Date
    Jun 2013
    Location
    Syracuse NY
    Posts
    934

    Default

    Tell him 7k if it needs interior. I just had my bow seats done. Cost 300 for both back seat had done last year was 380. Roughly. The trim you can get at iboat

    1995 supra labrisa
    Pro boss gt40
    GPS Ridesteady
    Pioneer headunit kicker speakers

  9. #9
    Join Date
    Apr 2012
    Location
    Tacoma, Wa
    Posts
    861

    Default

    $300 a skin is on the cheaper side for me locally
    2003 Supra Launch 22SSV
    1986 Ski Natique 2001

  10. #10
    Join Date
    Sep 2009
    Location
    Geneva IL
    Posts
    402

    Default

    If your handy. I took seat skins off myself. Upholstery shop charged me $75 a skin. Put back on myself.
    Chauncey 2000 Malibu Response LX Monsoon 325

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •