My tower mount screws are coming loose and I can't figure out how to get underneath the side to tighten them up does anybody have any tips for me
My tower mount screws are coming loose and I can't figure out how to get underneath the side to tighten them up does anybody have any tips for me
Torch, mirror 3/8 and 1/2 ring spanner, some curiosity, some searching, and you'll need someone to turn the screws from the upper deck. You do need some reach to get up behind the driver panel. Good luck
Not sure what your side panel setup is, but if it's similar to mine, you can get to the mounts pretty easily by removing a speaker. If that doesn't work, you can take the side panels off without too much trouble. The little quarter sized buttons will pop right off giving you access to a screw behind them. Loosen those up and the whole panel with the speakers and storage compartment will come right out. You should be able to get to the front mounts by crawling under the dash and storage compartment on the port side. While you're there, be sure to put some Loctite on those threads!