86 sunsport passenger seat

[lively]

Ok show off ! That's freakin sweet my man ! Lol where did you get the powered ones ?


Sent from my iPhone using Tapatalk

[jasun]

There is some detail in this thread. I got the actuator on Amazon and the struts from a buddy of mine. I have to switch is wired up to it, one at the driver seat, and one in place of one of the four vents at the back
http://supraboats.com/bbs/showthread.php?t=17220

I'll take some more pictures once I get my boat ready to go.


Sent from my iPhone using Tapatalk

[lively]

Here is what I've come up with

[lively]

image.jpgimage.jpgimage.jpgimage.jpg

[jet]

Nice work man.

[lively]

Nice work man.

thanks jet , it really seems to flow a lot better than before and once I get the carpet bonded and set up I'll take before and after pics .

[jet]

Hey I have my carpet glued down and hanging over into the bilge area but I havent cut it and glued the edges. Whats the best way to cut and glue and hold the edges down? You know?

[lively]

image.jpg

Hey I have my carpet glued down and hanging over into the bilge area but I havent cut it and glued the edges. Whats the best way to cut and glue and hold the edges down? You know?

The way I did it is I let it over hang about 2" and tucked and shot staples to hold it without rough edges . I have a air stapler and SS staples so that really the only reason why . But I painted my floor white this time and I'm using a snap in design carpet 40oz . It's supposed to be delivered to the shop today so will see

[Salty87]

Hey I have my carpet glued down and hanging over into the bilge area but I havent cut it and glued the edges. Whats the best way to cut and glue and hold the edges down? You know?

You could also get some aluminum trim from home depot and screw it into the stringers sealing the screws.

[jet]

Ah! ok. Just didnt want to put more holes in the stringer, but it will last another 10-15 years anyway so who cares by that point huh. 37081_10200336103595985_922461286_n.jpg