92 Comp Prop

[michael hunter]

Anybody have the OE numbers for a 92 comp with a 1.25 to 1 trans?

[Cusefan78]

Pretty sure it's the same as my Labrisa. 13x13 4 blade oj lh rotation

[crystal waters]

Doubt it is a four blade. Believe all combos came with a three blade from factory.
Just referenced some old spec sheets I have for 88 and 89
Suspect it was same for 92.
Three blade Nibral Bronze 13 x13 prop
Mftd by Federal or Michigan Wheel - both were suppliers to OEM supra.
By the way and not to be picky but just for future reference your transmission is a 1:23 to 1 where as you referred to
a 1:25 to 1.
Enjoy your boat as they don't make them like that any more unfortunately!

[cjtpilot]

My 92 has a 14 x 14 3 blade and as far as I know it is the original prop. Here are the recommendations from ACME and OJ

Hi Chris, I would recommend the 3-blade Acme 1442 (13.25 x 15 .090 cup) R 1" bore for your boat spec and skiing profile...

Thanks, Greg Resner
ACME SALES
ph. 1-888-661-2263



-----Original Message-----
From: Chris Taylor [mailto:[email protected]]
Sent: Sat 5/17/2014 7:00 PM
To: Website Mail
Subject: ACME Marine Group Contact Form


<http://www.acmemarine.com//lib/icons/icon[email].gif> Contact Form

<http://www.acmemarine.com//lib/icons/sm_icon[person].gif> From: "Chris Taylor" <[email protected]>
<http://www.acmemarine.com//lib/icons/sm_icon[folder].gif> Subject: ACME Marine Group Contact Form
<http://www.acmemarine.com//lib/icons/sm_icon[daily].gif> Date/Time: Saturday, May 17th, 2014 (5:00pm)
<http://www.acmemarine.com//lib/icons/sm_icon[webpage].gif> Page: http://www.acmemarine.com/contact_us.php
phone:
prop_mfg:
prop_pn:
prop_diam: 14
prop_pitch: 14
prop_bore: 1
prop_blades: 3
material: Nickel Aluminum Bronze
rotation: Right
max_rpm: 4500
max_speed: 42
max_units: MPH
boat_mfg: Supra
boat_model: Comp Ts6m
boat_year: 1992
oal: 20
boat_weight: 2500
hull_speed: 42
speed_units: MPH
engine_mfg: PCM
engine_model: ford 351
engine_year: 1992
fule: Gas
power: 240
rpm_low: 900
rpm_high: 4500
no_eng: Single
cid: 351
gear_ratio: 1.23
comments: Mainly slalom, barefoot, kids starting to wakeboard. usually have 4-6 people on board.


Chris,

I have had good success with our 13 X 16 RC 1" 4-blade, $444.00, on that boat.

Thanks,
Eric Johnson
Johnson Propeller
800-359-9730

Sent from my iPhone

> On May 19, 2014, at 11:47 AM, [email protected] wrote:
>
> Contact us
> Name
> Chris Taylor
> Email
> [email protected]
> Comment or question
> I am looking for the best prop for my use. I have a 1992 Supra Comp 351 PCM with 1.23/1 trans, current prop is 3 blade 14x14 1" bore RH rotation. WOT is 4500 RPM @42MPH. I slalom, barefoot, and kids wake board, usually have 4-6 people in boat.

[NoWake]

Michael, my 91 with same tranny had the original OJ 14 X 15 3 blade. At the suggestion of acme I put a 2068 12.5 X 15 RH 0.150 cup, 1" bore on. The other one acme recomended was a 470 also a 12.5 X 15. I was going to try them both back to back but my 30 day trial period ended with a carb rebuild

[kellogg101]

so i'm new to forms i just bought a 1987 supra comp ts6m and i have a few ? how can i get more power right when i goose it and when i'm going about 25mph and give it more gas i hear a popping /knocking noise the guy i bought it from said it was back fuel but i went threw that tank of gas and it is still knocking. what are something that i should look into for my boat what to replace or get for more power and a bigger wake thank