Hey everybody,
First time poster on this forum but I'm very active on a few others.
I figured I would throw up a few pics of my recent up grades to my comp.
a little history of it, I bought it this spring. It was a basket case but had a newly rebuilt 351W with built 302 heads, edge rock performer intake,Holley 600 carb, the stringers and floor have all been redone. The guy I bought it from spent the money to have this work done then tried to re-wire the boat but didn't know what he was doing... Lol so after fixing those things I've used the boat a couple months but the swim platform was messed up and the cent mount had flex in it so I decided to go with either starboard or seaboard to redo it. I called a local plastic shop and they had a cut piece they sold me and cut it for a good price. It a 3/4 seaboard which is 56"x25" and I reshape do it because I noticed the. Factory one always dipping in the wake
As for the wake plate...... When I bought the boat the manual adjusters were missing and one of the mount on the hull was broken. I searched for them but they were all over $100 for them. Now knowing the ride was poor from them missing I figured I would see if a could make a Bennett trim tab kit work on the boat... But with the short transom I know I would have to go with the Bennett "compact" cylinders. I ended up find a used kit on EBay that I won for $90 shipped. It came with 2 20x9 tabs and everything else minus the switches. Which was fine for my cause I plan to only use one switch cause I'm using both cylinders on one tab ok here a few pics of it almost completed
Please let the questions flow.... Lol