Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2015
    Posts
    6

    Default Surf weight for SA450 with Swell system

    Hi all

    I am looking for any input on different surf setups for a 2014 SA with the swell set up. I have a decent wave but would like to see if there is some better tunes out there I could try. My current set up is as follows:

    Speed - 11.1mph
    Swell - skim setting (factory default)
    Wakeplate - 30%
    Rear Ballast - 770lb both sides
    Front ballast - 60%

    Would love some input on what people have found to be a good setup for their SA's out there.

    thanks

    Jason

  2. #2
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    You might want to try to post on the Moomba site. There are more guys over there with new boats - Supra and Moomba. I know there are some regulars with 13s-14s and the SA model.

  3. #3
    Join Date
    Jun 2015
    Posts
    6

    Default

    Thanks

    Sent from my SM-G935W8 using Tapatalk

  4. #4

    Default

    port 100% center 70% starboard 75% smart plate 25& wake plate 50% speed 11.0
    Attached Images Attached Images

  5. #5
    Join Date
    Aug 2016
    Location
    seattle wa
    Posts
    4

    Default

    will have to try this out Regan im one week in on my new SA 450 and looking for that sweet set up.... is it usaully the exact oppisite on the settings if you wanna switch over to the other side?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •