1986 Sunsport (open bow) rebuild

[Okie Boarder]

Definitely looking really good. Nice job!

[torch]

Any updates?


Sent from my iPhone using Tapatalk

[Milliken37]

Any updates?


Sent from my iPhone using Tapatalk

School has been kicking my ass so I haven't had much time to work on it. I was having trouble getting her fired up the other day. We found that the fuel filter/ water separator was clogged and restricting flow. After bypassing the filter it starts up and runs like a charm! Hopefully there will be some water in the next pics!


Sent from my iPhone using Tapatalk

[Milliken37]

Here's the link for my time laps for sewing and wrapping the most complex cushion in the boat. Enjoy https://youtu.be/r6RbwzqDZgM



Sent from my iPhone using Tapatalk

[Milliken37]

I've mentioned installing "seadek" in the past. This is what I really meant, buying 3 sheets of off brand Eva foam flooring and routing it myself. This method will cost me $320 where as seadek would be in upwards of $1,300. This is a trial run to make sure I would get clean cuts and it turned out AWESOME!!!


Sent from my iPhone using Tapatalk

[KELLER343]

Are you just free handing with a router?

[Milliken37]

Are you just free handing with a router?

Nope, I was going to do that until my school purchased a CNC router. It's only 28"x18" so the larger sections will be tricky. I'm using solidworks to make the patterns but any CAD software could be used.

I made the first actual flooring sections to the proper dimensions, which I will be installing tonight.



Sent from my iPhone using Tapatalk

[KELLER343]

Looks awesome! Cant wait to see the finished product. I would love to do this to my saltare but isn't perfectly flat

[Milliken37]

Looks awesome! Cant wait to see the finished product. I would love to do this to my saltare but isn't perfectly flat

Thanks! I'll keep ya posted. I installed the two pieces I cut out. Really satisfied with it!




Sent from my iPhone using Tapatalk

[Milliken37]

...........