Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2016
    Location
    Livingston, Tx.
    Posts
    46

    Default Batteries & Amps redo

    Time for new batteries started with a big mess from the PO and Stereo shop. IMG_0247.jpg The amp board was screwed on the right side only and down hard on the battery box. Once I got the battery out from under it, it would wave like a flag. The fuse block was screwed to the side of the battery box with the screws poking in (against the battery) a good 1/2 inch. I also needed a mounting spot for the new battery charger so out with the old and in with the new!IMG_0263.jpg. It's a tough spot to work in, hopefull I won't have to get in there again for a long time, here are the after pics.IMG_0270.jpgIMG_0271.jpg
    03 Launch 22V
    3) 800lb sacks, Perfect Pass
    Fusion head, JL amps, Wet Sounds Interior/Tower Speakers, 10" Sub
    "Anyone have a stainless steel magnet?"

  2. #2
    Join Date
    Apr 2015
    Location
    Houston, TX
    Posts
    52

    Default

    Wow nice job! that looks way cleaner & functional!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •