Results 1 to 6 of 6
  1. #1
    Join Date
    Mar 2007
    Location
    Central Virginia
    Posts
    160

    Default Wakeplate Gauge in 07 Sunsport

    I need some help. My wakeplate gauge does not travel the full distance. Is it supposed too? I have checked the breaker and it is not blown. Before I bring my boat in for service, I want to make sure I know the range of that gauge. Currently my goes about 30-40%.

    Thanks

  2. #2
    Join Date
    Nov 2004
    Location
    Portland Orgon
    Posts
    78

    Default

    I have the 22ssv 07 and my gauge goes all the way. My 21s did also. It just sounds like the gauge is not working real well.

  3. #3
    Join Date
    Dec 2006
    Location
    Falling Waters, WV
    Posts
    43

    Default

    You may be low on fluid. Have you seen any sign of ATF in your bilge? (hint, it's red/pink colored) My '06 Launch leaked down in a couple months, left a redish slime in the bilge. I fixed the loose fitting & refilled. When low on fluid it won't go down all the way
    old boat - 1995 ts6m
    new boat - 2006 Launch 20

  4. #4
    Join Date
    Nov 2004
    Location
    Maryville TN
    Posts
    76

    Default

    The gauge can be re-calibrated using the info center screen.

  5. #5
    Join Date
    Mar 2007
    Location
    Central Virginia
    Posts
    160

    Default

    Thanks, I will check both. I have never checked the fluid or knew about the calibration. Is the how to on the calibration in the manual? I looked (quickly) but did not find it.

  6. #6
    Join Date
    Mar 2007
    Location
    Central Virginia
    Posts
    160

    Default

    Forget my last request on the how too, this time I opened my eyes - and saw the how too on page 98 - the same page I said I did not see it!

    Anyway, I will try it out the next time we go out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •