1995 Supra impulse Soft floors

[95supra]

Can anyone shed some light on how to replace the floors in my boat. I know the carpet will probably need to be replaced but how involved will floor restoration be. I only have a few spots in the rear on the exterior left hand side but after a tear down there maybe more. Pictures would sure help

[michael hunter]

Are you sure its a 95 ? It should be all composite construction.

[scottschmitt]

Several links in this post (https://forum.supraboats.com/showthr...f-a-used-Supra)
Like he said, if '95, would be odd to have a soft floor as it was all composite.

[crystal waters]

Several links in this post (https://forum.supraboats.com/showthr...f-a-used-Supra)
Like he said, if '95, would be odd to have a soft floor as it was all composite.

Your boats serial number is on the rear right of the transom just below the rub rail.
What are the last two digits?
If "95" then it is a 1995 model.

[95supra]

I'll have to verify

[scottschmitt]

Easier question: is your windshield rounded or square? Rounded started with the composite floors. Square windshields have wood floors. As you see from the pictures in this thread, Mr. Hunter, Mr. Waters, and I all have wood floors.

[95supra]

Yup, I guess I had wishful thinking, mine is a 1991 so now what? The engine mounts are tight and holding and I'm not going to split the boat hull, suggestions. This boat looks fantastic and only 360 hours, runs great

[michael hunter]

If you don't split the hull all you can do is cut out the soft spots and patch it up . Keep an eye on the stringers and engine alignment and enjoy the boat as long as you can.

[95supra]

Thanks for all your feedback, it is appreciated

[95supra]

What would it cost to have this done, four tines what the boat is worth ha ha?