Results 1 to 7 of 7
  1. #1
    Join Date
    May 2002
    Location
    Muncie, IN
    Posts
    39

    Default Surf device on Supra 242

    So I could not get my suck gate suction cups on my buddies 242 due to mold line. Anyone using a device that works on this exact boat?
    Chris Walker
    President, www.spotlessboat.com
    President Emeritus, www.usawakeboard.com

  2. #2
    Join Date
    Jun 2002
    Location
    Canton, GA
    Posts
    243

    Default

    Check this out.... Works great.... https://forum.supraboats.com/showthr...port-242/page8

  3. #3
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    Works well on the 242. Buy the one on his boat.

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  4. #4
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    1,247

    Default

    No issues with mine yet. Even added an additional 1000 lbs of ballast last weekend for a total of 3800 lbs and the Inland Curl ($140 model I use) performed flawlessly. Didn't budge a bit and creates a great wake. See thread below where I talk more about it. I've learned it is easier to put on underwater so I wait until all bags are full to apply.

    https://forum.supraboats.com/showthr...of-wake-shaper

    1983 Supra Rider aka Mischief IV
    1983 Supra Beast
    1985 Supra Rider
    1986 Supra Sunsport Skier
    1987 Supra Marauder
    1991 Supra Comp ts6m
    2012 Supra Sunsport 242

  5. #5
    Join Date
    Dec 2015
    Location
    Lake Nottely, Blairsville, GA
    Posts
    1,247

    Default

    Few pics with wake shaper from last weekend. Notice on first pic, the splash created by shaper on left side of pic at transom. The last pic shows water up to the rub rail. Boat was loaded with 3800 lbs ballast, full tank of gas, and 6 souls on board.






    1983 Supra Rider aka Mischief IV
    1983 Supra Beast
    1985 Supra Rider
    1986 Supra Sunsport Skier
    1987 Supra Marauder
    1991 Supra Comp ts6m
    2012 Supra Sunsport 242

  6. #6
    Join Date
    Jun 2012
    Location
    Knoxville TN
    Posts
    1,415

    Default

    Cool pics.

    Those should dispel any 242 hull fallacy.

    Sent from my P00I using Tapatalk
    2018 Supra SL400

  7. #7
    Join Date
    Jul 2020
    Posts
    13

    Default

    Dan, any help on how that 3800lb is distributed?
    I ordered a nauticurl, and the 1280lb wakemakers kit for the rear lockers.

    add about 500lb of lead under the left/right seats toward the rear?

    Sent from my SM-N950U using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •